Extraction of Metals – Zinc, Mercury and Iron MCQ questions with answers

IOE Entrance Exam · Chemistry. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 465 questions is free to practise on Prashnalaya.

Topics covered: Iron compounds: FeSO4, Fe2O3 and iron(III) chloride, Iron: occurrence and extraction (blast furnace), Mercury compounds: calomel and corrosive sublimate, Mercury: occurrence, extraction and properties, Zinc compounds: ZnO, ZnSO4 (white vitriol), Zinc: occurrence, extraction and properties

  1. Q1.
    In the blast furnace, the chief ore used for extraction of iron is _____.
    • A.bauxite
    • B.haematite
    • C.calamine
    • D.cinnabar
    Show answer and explanation

    Answer: B. haematite

    Haematite, , is the chief ore commonly used for extraction of iron in the blast furnace. Bauxite is an ore of aluminium, calamine is an ore of zinc, and cinnabar is an ore of mercury.
  2. Q2.
    The molten impurity removed from the blast furnace as a separate layer is called _____.
    • A.alloy
    • B.slag
    • C.matte
    • D.coke
    Show answer and explanation

    Answer: B. slag

    In the blast furnace, gangue combines with flux to form a fusible molten mass called slag. It floats over molten iron and can be removed easily. Coke is the fuel and reducing agent, while matte and alloy are different metallurgical terms.
  3. Q3.
    The substance added to the blast furnace to remove silica impurity is usually _____.
    • A.gypsum
    • B.limestone
    • C.rock salt
    • D.graphite
    Show answer and explanation

    Answer: B. limestone

    Limestone, , is added as a flux in the blast furnace. It decomposes to give , which combines with silica impurity, , to form calcium silicate slag, .
  4. Q4.
    The hot air blown into the lower part of the blast furnace is known as _____.
    • A.draft
    • B.steam jet
    • C.air blast
    • D.furnace gas
    Show answer and explanation

    Answer: C. air blast

    Preheated air is forced into the lower part of the blast furnace through tuyeres. This stream is called the air blast. It helps coke burn vigorously and produce the high temperature needed for extraction.
  5. Q5.
    In the blast furnace, coke mainly acts as a fuel and a _____ agent.
    • A.oxidizing
    • B.dehydrating
    • C.neutralizing
    • D.reducing
    Show answer and explanation

    Answer: D. reducing

    Coke serves two important roles in the blast furnace: it provides heat by combustion and also helps in reduction. It forms carbon monoxide, which reduces iron oxides to iron. Therefore, coke acts as a reducing agent.
  6. Q6.
    The gas that directly reduces to iron in the upper region of the blast furnace is _____.
    • A.carbon monoxide
    • B.oxygen
    • C.sulfur dioxide
    • D.chlorine
    Show answer and explanation

    Answer: A. carbon monoxide

    Carbon monoxide is the main reducing gas in the blast furnace. It reduces iron oxides stepwise to iron, for example: . Oxygen is used up in burning coke, while sulfur dioxide and chlorine do not play this reducing role.
  7. Q7.
    The calcium oxide formed from limestone combines with silica to produce _____.
    • A.calcium carbide
    • B.calcium silicate
    • C.calcium sulfate
    • D.calcium phosphate
    Show answer and explanation

    Answer: B. calcium silicate

    Limestone decomposes as . The formed reacts with silica impurity, , to produce calcium silicate, , which forms slag. This helps remove earthy impurities from the ore.
  8. Q8.
    The openings through which hot air is introduced into a blast furnace are called _____.
    • A.crucibles
    • B.stoppers
    • C.tuyeres
    • D.retorts
    Show answer and explanation

    Answer: C. tuyeres

    Tuyeres are the nozzles or openings near the base of the blast furnace through which preheated air is blown in. This air supports combustion of coke. Crucibles and retorts are used in other laboratory or industrial setups.
  9. Q9.
    The iron obtained directly from the blast furnace contains about carbon and is called _____ iron.
    • A.cast
    • B.wrought
    • C.mild
    • D.stainless
    Show answer and explanation

    Answer: A. cast

    Iron produced directly from the blast furnace is pig iron, which is a form of cast iron rich in carbon, usually around . Wrought iron has very low carbon, mild steel has moderate carbon, and stainless steel contains chromium and other alloying elements.
  10. Q10.
    At the bottom of the blast furnace, carbon burns in oxygen to first produce _____.
    • A.carbon dioxide
    • B.carbon monoxide
    • C.calcium oxide
    • D.silicon dioxide
    Show answer and explanation

    Answer: A. carbon dioxide

    Near the bottom of the blast furnace, coke burns in the oxygen of the air blast according to . This carbon dioxide then reacts with more coke to form carbon monoxide: . Thus, the first product is carbon dioxide.

Practise all 465 Extraction of Metals – Zinc, Mercury and Iron questions

Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.

Start practising free

More Chemistry chapters

All IOE Entrance Exam subjects →