Heat and Thermodynamics MCQ questions with answers
IOE Entrance Exam · Physics. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 1,534 questions is free to practise on Prashnalaya.
Topics covered: Conduction: thermal conductivity and Fourier's law, Convection: natural and forced convection, Entropy: concept and second law interpretation, First law of thermodynamics: heat, work and internal energy, Heat capacities of gases: Cp, Cv and ratio γ, Heat engine: efficiency and Carnot cycle, Kinetic theory of gases: molecular properties and pressure, Newton's law of cooling and triple point, Otto cycle and Diesel cycle, Radiation: black body, Stefan-Boltzmann law, Refrigerator: working principle and coefficient of performance, Second law of thermodynamics: Kelvin-Planck and Clausius statements, Specific heat and latent heat: measurement and method of mixtures, Thermal equilibrium and temperature measurement, Thermal expansion of liquids: real and apparent expansion, Thermal expansion of solids: linear, superficial and volumetric, Thermodynamic processes: isothermal, adiabatic, isochoric, isobaric
- Q1.According to Fourier's law, the rate of heat conduction through a slab is directly proportional to the temperature gradient across it.
Show answer and explanation
Fourier's law states that the heat current is proportional to area and temperature gradient, and opposite in direction to increasing temperature. In magnitude, . Therefore, a larger temperature gradient gives a larger rate of heat conduction. - Q2.The SI unit of thermal conductivity is watt per meter-kelvin, written as .
Show answer and explanation
Thermal conductivity appears in Fourier's law . Rearranging units gives , which leads to the SI unit . - Q3.In steady-state conduction through a uniform rod, the amount of heat entering one cross-section per second is equal to the amount leaving another cross-section per second.
Show answer and explanation
In steady state, temperature at each point remains constant with time. That means there is no net accumulation of thermal energy inside any part of the rod. Hence the heat current is the same at all cross-sections. - Q4.A material with higher thermal conductivity offers greater resistance to heat flow.
Show answer and explanation
Thermal resistance for a slab is . If increases, resistance decreases. So a higher thermal conductivity means heat passes more easily, not with greater resistance. - Q5.For two slabs of the same material and area, the thicker slab conducts heat at a greater rate when the same temperature difference is maintained across them.
Show answer and explanation
From Fourier's law, . With the same , , and , the rate is inversely proportional to thickness . So the thicker slab conducts heat more slowly. - Q6.The negative sign in Fourier's law indicates that heat flows from lower temperature to higher temperature.
Show answer and explanation
The negative sign shows that heat flows opposite to the direction of increasing temperature. Therefore, heat naturally flows from higher temperature to lower temperature. - Q7.If the cross-sectional area of a conducting bar is doubled while all other factors remain unchanged, the heat conducted per second also doubles.
Show answer and explanation
Using , the heat current is directly proportional to cross-sectional area . Therefore, doubling doubles the heat conducted per second. - Q8.The thermal conductivity of copper is generally much greater than that of wood.
Show answer and explanation
Copper is a good conductor of heat, while wood is a poor conductor and acts more like an insulator. In practical life, this is why cooking utensils often use metal bases but wooden handles. - Q9.In a composite wall with layers connected in series, the same heat current passes through each layer under steady conditions.
Show answer and explanation
For layers in series under steady-state conduction, there is no heat accumulation at the interfaces. Therefore, the rate of heat transfer through each layer must be equal, although the temperature drop across each layer may differ depending on its thermal resistance. - Q10.If the temperature gradient inside a rod is zero everywhere, conduction heat flow through the rod must also be zero.
Show answer and explanation
Fourier's law gives heat current density as proportional to the negative temperature gradient. If the gradient is zero, then there is no driving force for conduction, so the conduction heat flow is zero.
Practise all 1,534 Heat and Thermodynamics questions
Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.
More Physics chapters
- Circular Motion and Gravitation MCQs969
- DC Circuits MCQs792
- Dispersion of Light MCQs547
- Elasticity MCQs550
- Electromagnetic Induction and AC MCQs840
- Electrostatics MCQs888
- Fluid Mechanics MCQs868
- Kinematics MCQs426
- Magnetic Effects of Current MCQs651
- Magnetic Properties of Matter MCQs382
- Modern Physics MCQs930
- Newton's Laws and Friction MCQs744
- Radioactivity and Nuclear Physics MCQs693
- Recent Trends in Physics MCQs771
- Reflection and Refraction MCQs932
- Rotational Dynamics MCQs581
- Semiconductors and Electronics MCQs644
- Simple Harmonic Motion MCQs644
- Thermoelectric Effect MCQs353
- Units, Dimensions and Vectors MCQs533
- Wave Optics MCQs680
- Waves and Sound MCQs925
- Work, Energy and Power MCQs770
