Inorganic Chemistry – Non-metals MCQ questions with answers

CEE Entrance · Chemistry. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 775 questions is free to practise on Prashnalaya.

Topics covered: Allotropes of carbon; chemical properties of carbon monoxide, Chemical properties of ammonia and phosphine, Halogen acids: preparation and properties of HCl, HBr and HI, Halogens: general characteristics; preparation, properties and test of Cl2, Br2 and I2, Hydrogen: atomic, molecular and nascent; isotopes; heavy water, Hydrogen sulphide, sulphur dioxide, sulphuric acid: preparation and properties, Nitric acid: preparation and chemical properties, Types of oxides; preparation, structure and test of ozone; ozone layer depletion

  1. Q1.
    Arrange the halogens in decreasing order of oxidizing power.
    • A.Br2
    • B.I2
    • C.Cl2
    • D.F2
    Show answer and explanation

    Answer: A. Br2, B. I2, C. Cl2, D. F2

    Among halogens, oxidizing power decreases down the group because atomic size increases and the tendency to gain electrons decreases. Therefore the correct decreasing order is F2 > Cl2 > Br2 > I2.
  2. Q2.
    Arrange the following steps in the laboratory preparation and collection of chlorine gas from and concentrated : Dry the gas using concentrated Generate chlorine by heating the reaction mixture Collect the gas by downward displacement of air Wash the gas to remove fumes
    • A.Collect the gas by downward displacement of air
    • B.Generate chlorine by heating the reaction mixture
    • C.Dry the gas using concentrated
    • D.Wash the gas to remove fumes
    Show answer and explanation

    Answer: A. Collect the gas by downward displacement of air, B. Generate chlorine by heating the reaction mixture, C. Dry the gas using concentrated , D. Wash the gas to remove fumes

    In the laboratory, chlorine is prepared by heating with concentrated :



    The gas coming out of the flask is not pure chlorine. It contains chlorine along with impurities such as fumes and moisture.

    So the correct sequence is:

    1. Generate chlorine by heating the reaction mixture
    This is the first step, because chlorine must be produced before it can be purified or collected.

    2. Wash the gas to remove fumes
    The evolved gas is passed through water or a suitable washing arrangement to remove hydrogen chloride fumes, which are highly soluble in water.

    3. Dry the gas using concentrated
    After washing, the chlorine becomes moist. Concentrated sulfuric acid is used as a drying agent to remove water vapour.

    4. Collect the gas by downward displacement of air
    Dry chlorine is finally collected by downward displacement of air because chlorine is denser than air and cannot be collected over water due to its solubility and reaction in water.

    Therefore, the correct order is:
    Generate chlorine by heating the reaction mixture Wash the gas to remove fumes Dry the gas using concentrated Collect the gas by downward displacement of air.
  3. Q3.
    Arrange the halide ions in increasing order of ease of oxidation to their corresponding halogens.
    • A.
    • B.
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. , C. , D.

    Ease of oxidation of halide ions increases down the group. is most easily oxidized to , while is the most difficult to oxidize. Therefore the increasing order of ease of oxidation is .
  4. Q4.
    Arrange the colors of halogens in the gaseous or vapor state from lightest to darkest appearance.
    • A.Iodine vapor
    • B.Bromine vapor
    • C.Chlorine gas
    Show answer and explanation

    Answer: A. Iodine vapor, B. Bromine vapor, C. Chlorine gas

    Chlorine gas is greenish yellow, bromine vapor is reddish brown, and iodine vapor is violet. When arranged from lightest to darkest appearance, the order is chlorine gas, bromine vapor, then iodine vapor.
  5. Q5.
    In testing an unknown sample suspected to contain chloride, bromide, and iodide ions, arrange the observations with chlorine water in the order of increasing ease of displacement by chlorine.
    • A. solution
    • B. solution
    • C. solution
    Show answer and explanation

    Answer: A. solution, B. solution, C. solution

    Chlorine is more reactive than bromine and iodine, so it can displace from bromide and from iodide, but it cannot displace chloride from chloride ion. Thus the increasing ease of displacement by chlorine is iodide solution first, then bromide solution, then chloride solution. This principle is used in qualitative tests for halide ions.
  6. Q6.
    Arrange the following substances in the order in which concentrated nitric acid oxidizes them to the indicated products. Copper forms copper nitrate and nitrogen dioxide Carbon forms carbon dioxide Sulfur forms sulfuric acid Phosphorus forms phosphoric acid Choose the correct sequence from a common increasing tendency of oxidation by concentrated nitric acid under suitable conditions.
    • A.Carbon forms carbon dioxide
    • B.Phosphorus forms phosphoric acid
    • C.Copper forms copper nitrate and nitrogen dioxide
    • D.Sulfur forms sulfuric acid
    Show answer and explanation

    Answer: A. Carbon forms carbon dioxide, B. Phosphorus forms phosphoric acid, C. Copper forms copper nitrate and nitrogen dioxide, D. Sulfur forms sulfuric acid

    Concentrated nitric acid acts as a strong oxidizing agent and oxidizes many non-metals and metals to higher oxidation products. Under suitable conditions, sulfur is oxidized to sulfuric acid, carbon to carbon dioxide, and phosphorus to phosphoric acid, while copper reacts to give copper nitrate with evolution of nitrogen dioxide. The sequence asked in the option set that correctly groups the standard textbook reactions is Copper → Sulfur → Carbon → Phosphorus. This reflects the listed reaction progression in the given choices.
  7. Q7.
    Arrange the following nitrogen oxide products obtained when nitric acid acts as an oxidizing acid, from highest oxidation state of nitrogen to lowest. Nitrogen dioxide Nitric oxide Nitrous oxide Ammonium nitrate
    • A.Nitrous oxide
    • B.Nitrogen dioxide
    • C.Ammonium nitrate
    • D.Nitric oxide
    Show answer and explanation

    Answer: A. Nitrous oxide, B. Nitrogen dioxide, C. Ammonium nitrate, D. Nitric oxide

    In these products, nitrogen has different oxidation states. In nitrogen dioxide, N is +4; in nitric oxide, N is +2; in nitrous oxide, the average oxidation state of N is +1; and in ammonium nitrate, the ammonium part contains nitrogen at -3. Therefore, from highest oxidation state to lowest, the order is Nitrogen dioxide → Nitric oxide → Nitrous oxide → Ammonium nitrate.
  8. Q8.
    Arrange the following reactions involving nitric acid according to increasing dilution of nitric acid used with copper. Formation of nitrous oxide as reduction product Formation of ammonium nitrate as reduction product Formation of nitrogen dioxide as reduction product Formation of nitric oxide as reduction product
    • A.Formation of nitric oxide as reduction product
    • B.Formation of ammonium nitrate as reduction product
    • C.Formation of nitrogen dioxide as reduction product
    • D.Formation of nitrous oxide as reduction product
    Show answer and explanation

    Answer: A. Formation of nitric oxide as reduction product, B. Formation of ammonium nitrate as reduction product, C. Formation of nitrogen dioxide as reduction product, D. Formation of nitrous oxide as reduction product

    When copper reacts with nitric acid, the nitrogen of nitrate ion is reduced, and the product formed depends on how concentrated or dilute the nitric acid is. As the acid becomes more dilute, the oxidizing power effectively decreases, so nitrogen is reduced to progressively lower oxidation states.

    The relevant reduction products are:
    - in concentrated nitric acid
    - in dilute nitric acid
    - in more dilute nitric acid
    - in very dilute nitric acid

    Their nitrogen oxidation states become lower in this sequence:
    - In ,
    - In ,
    - In , average
    - In of ammonium nitrate,

    So, with increasing dilution of nitric acid used with copper, the order is:

    1. Formation of nitrogen dioxide as reduction product
    2. Formation of nitric oxide as reduction product
    3. Formation of nitrous oxide as reduction product
    4. Formation of ammonium nitrate as reduction product

    Thus the correct arrangement is:

    Formation of nitrogen dioxide as reduction product Formation of nitric oxide as reduction product Formation of nitrous oxide as reduction product Formation of ammonium nitrate as reduction product
  9. Q9.
    Arrange the following oxides in increasing order of acidic character:
    • A.
    • B.
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. , C. , D.

    and are neutral oxides, but is less reactive and placed first. is an acidic oxide and is strongly acidic because it is the anhydride of nitric acid. Therefore, the increasing order of acidic character is .
  10. Q10.
    Arrange the steps involved in laboratory preparation of ozone from oxygen in the correct sequence. Pass dry oxygen through an ozonizer. Apply silent electric discharge. Cool the apparatus to improve ozone yield. Collect the ozonized oxygen mixture.
    • A.Apply silent electric discharge
    • B.Collect the ozonized oxygen mixture
    • C.Pass dry oxygen through an ozonizer
    • D.Cool the apparatus to improve ozone yield
    Show answer and explanation

    Answer: A. Apply silent electric discharge, B. Collect the ozonized oxygen mixture, C. Pass dry oxygen through an ozonizer, D. Cool the apparatus to improve ozone yield

    Ozone is prepared from oxygen in an ozonizer by passing dry oxygen through the apparatus and subjecting it to a silent electric discharge:



    For better yield, the ozonizer is kept cool because ozone is unstable and decomposes more readily at higher temperature. Therefore, the correct sequence is:

    1. Cool the apparatus to improve ozone yield.
    2. Pass dry oxygen through an ozonizer.
    3. Apply silent electric discharge.
    4. Collect the ozonized oxygen mixture.

    The product obtained is not pure ozone but a mixture of ozone and unreacted oxygen, so collection is done at the end after the discharge process.

Practise all 775 Inorganic Chemistry – Non-metals questions

Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.

Start practising free

More Chemistry chapters

All CEE Entrance subjects →