Organic Chemistry – Alcohols & Phenols MCQ questions with answers
CEE Entrance · Chemistry. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 438 questions is free to practise on Prashnalaya.
Topics covered: Industrial manufacture: oxo-process, hydroboration-oxidation, fermentation, Nomenclature, isomerism and classification of monohydric alcohols, Preparation and chemical properties of monohydric alcohols, Preparation and chemical properties of phenol, Types of ethanol: absolute, power, methylated, rectified spirit, alcoholic beverages
- Q1.Arrange the following steps in the correct order for industrial ethanol production by fermentation of molasses: Preparation of sugar solution and adjustment of conditions, Distillation of the fermented wash, Fermentation by yeast, Removal of suspended impurities if needed.
- A.Fermentation by yeast
- B.Preparation of sugar solution and adjustment of conditions
- C.Distillation of the fermented wash
- D.Removal of suspended impurities if needed
Show answer and explanation
Answer: A. Fermentation by yeast, B. Preparation of sugar solution and adjustment of conditions, C. Distillation of the fermented wash, D. Removal of suspended impurities if needed
In the industrial production of ethanol from molasses, the steps must follow the processing sequence from raw material treatment to final separation.
1. **Removal of suspended impurities if needed**
Molasses may contain dirt, colloidal matter, and other suspended impurities. These are removed first so that the later fermentation process is not disturbed and the medium becomes suitable for yeast activity.
2. **Preparation of sugar solution and adjustment of conditions**
After clarification, the molasses is diluted with water to prepare a suitable sugar solution. Then important conditions such as pH, temperature, and nutrient content are adjusted so that yeast can ferment efficiently.
3. **Fermentation by yeast**
Yeast is added to the prepared solution. It converts sugars into ethanol and carbon dioxide under suitable conditions:
This is the main biochemical step in ethanol production.
4. **Distillation of the fermented wash**
After fermentation, the liquid contains ethanol mixed with water and other substances. Distillation is carried out at the end to separate and collect ethanol from the fermented wash.
So, the correct order is:
**Removal of suspended impurities if needed → Preparation of sugar solution and adjustment of conditions → Fermentation by yeast → Distillation of the fermented wash**. - Q2.Arrange the following in the correct sequence for hydroboration-oxidation of propene to form 1-propanol: Attack of , Formation of trialkylborane intermediate, Addition of across the double bond, Replacement of boron by hydroxyl group.
- A.Formation of trialkylborane intermediate
- B.Replacement of boron by hydroxyl group
- C.Addition of across the double bond
- D.Attack of
Show answer and explanation
Answer: A. Formation of trialkylborane intermediate, B. Replacement of boron by hydroxyl group, C. Addition of across the double bond, D. Attack of
$Hydroboration–oxidation of propene to form 1-propanol occurs in two main stages: hydroboration followed by oxidation.
First, adds across the double bond of propene in a syn addition. In this step, boron attaches to the less substituted carbon and hydrogen attaches to the more substituted carbon, giving an organoborane intermediate.
Since one molecule of has three B–H bonds, it can react with three alkene molecules, so the organoborane ultimately becomes a trialkylborane intermediate.
Next, in the oxidation step, alkaline hydrogen peroxide, , attacks the boron-containing intermediate. This converts the C–B bond into a C–O bond through oxidation.
Finally, boron is replaced by the hydroxyl group, producing the alcohol. For propene, this gives anti-Markovnikov addition overall, so the product is 1-propanol.
Therefore, the correct sequence is:
1. Addition of across the double bond
2. Formation of trialkylborane intermediate
3. Attack of
4. Replacement of boron by hydroxyl group$ - Q3.Arrange the stages of the oxo-process for preparing higher alcohols from alkenes in the proper order: Hydrogenation of aldehyde, Formation of alkene-cobalt or rhodium catalytic complex under reaction conditions, Hydroformylation with synthesis gas to give aldehyde, Separation and purification of the alcohol product.
- A.Hydrogenation of aldehyde
- B.Separation and purification of the alcohol product
- C.Formation of alkene-cobalt or rhodium catalytic complex under reaction conditions
- D.Hydroformylation with synthesis gas to give aldehyde
Show answer and explanation
Answer: A. Hydrogenation of aldehyde, B. Separation and purification of the alcohol product, C. Formation of alkene-cobalt or rhodium catalytic complex under reaction conditions, D. Hydroformylation with synthesis gas to give aldehyde
The oxo-process converts an alkene into a higher alcohol through hydroformylation followed by hydrogenation.
The correct sequence is:
1. Formation of alkene-cobalt or rhodium catalytic complex under reaction conditions
First, the alkene interacts with the cobalt or rhodium catalyst under suitable temperature and pressure. This forms the active catalytic complex needed for the reaction to proceed.
2. Hydroformylation with synthesis gas to give aldehyde
Next, synthesis gas, which is a mixture of carbon monoxide and hydrogen, reacts with the alkene in the presence of the catalyst. A formyl group and a hydrogen atom are added across the double bond, producing an aldehyde. This step is called hydroformylation.
3. Hydrogenation of aldehyde
The aldehyde formed in the previous step is then reduced by hydrogenation to produce the corresponding alcohol.
4. Separation and purification of the alcohol product
Finally, the alcohol is isolated from the reaction mixture and purified.
So the proper order is:
Formation of catalytic complex Hydroformylation to aldehyde Hydrogenation to alcohol Separation and purification. - Q4.Arrange the following alcohol preparation methods in increasing complexity of industrial control, starting from the simplest small-scale biochemical route to the most catalyst-intensive industrial route: Fermentation, Hydroboration-oxidation, Oxo-process, Catalytic hydrogenation of oxo aldehyde intermediate.
- A.Catalytic hydrogenation of oxo aldehyde intermediate
- B.Hydroboration-oxidation
- C.Fermentation
- D.Oxo-process
Show answer and explanation
Answer: A. Catalytic hydrogenation of oxo aldehyde intermediate, B. Hydroboration-oxidation, C. Fermentation, D. Oxo-process
The correct increasing order is:
Fermentation Hydroboration-oxidation Oxo-process Catalytic hydrogenation of oxo aldehyde intermediate
Reasoning:
1. Fermentation is the simplest route among these.
It is a biochemical method in which sugars are converted into alcohol, typically ethanol, by yeast under mild conditions. It is commonly done on small scale and does not require sophisticated metal catalysts, high-pressure gas handling, or complex reactor control.
2. Hydroboration-oxidation is more controlled than fermentation.
In this method, an alkene first reacts with borane, and the organoborane intermediate is then oxidized to give an alcohol. This is a laboratory or chemical synthesis route requiring careful reagent handling and stepwise reaction control, so it is more complex than fermentation.
3. The oxo-process is a more advanced industrial catalytic route.
The oxo-process is hydroformylation of an alkene using synthesis gas () in the presence of a transition-metal catalyst, producing an aldehyde intermediate. This requires industrial pressure control, gas-feed regulation, and catalyst management, making it more complex than hydroboration-oxidation.
4. Catalytic hydrogenation of the oxo aldehyde intermediate is placed last because it is an additional catalyst-intensive industrial step.
After the oxo-process forms the aldehyde, that aldehyde is hydrogenated to the corresponding alcohol using another catalytic process. Since this comes after hydroformylation and adds another controlled industrial catalytic stage, it represents the highest level of industrial control among the listed methods.
So, from the simplest biochemical route to the most catalyst-intensive industrial route: - Q5.In the complete conversion of an alkene to an anti-Markovnikov alcohol by hydroboration-oxidation, arrange the events in the correct mechanistic order: Concerted syn addition giving organoborane at the less substituted carbon, Oxidative migration from carbon to oxygen, Alkene reacts with borane reagent, Hydrolysis gives the alcohol product.
- A.Hydrolysis gives the alcohol product.
- B.Concerted syn addition giving organoborane at the less substituted carbon
- C.Oxidative migration from carbon to oxygen
- D.Alkene reacts with borane reagent
Show answer and explanation
Answer: A. Hydrolysis gives the alcohol product., B. Concerted syn addition giving organoborane at the less substituted carbon, C. Oxidative migration from carbon to oxygen, D. Alkene reacts with borane reagent
Hydroboration–oxidation converts an alkene into an anti-Markovnikov alcohol in a definite sequence.
1. **Alkene reacts with borane reagent**
The reaction begins when the alkene is treated with a borane reagent such as .
2. **Concerted syn addition giving organoborane at the less substituted carbon**
In the hydroboration step, boron and hydrogen add across the double bond in one concerted step. This is a **syn addition**, so both are added to the same side of the double bond. Because of steric and electronic effects, boron attaches to the **less substituted carbon**, giving the organoborane intermediate. This is why the final alcohol shows **anti-Markovnikov** orientation.
3. **Oxidative migration from carbon to oxygen**
In the oxidation step with , the organoborane is converted into an alkoxide-like intermediate. During this process, the carbon group bonded to boron migrates to oxygen, replacing the bond with a bond.
4. **Hydrolysis gives the alcohol product**
Finally, hydrolysis/protonation converts the oxygen-containing intermediate into the alcohol.
So the correct mechanistic order is:
Alkene reacts with borane reagent Concerted syn addition giving organoborane at the less substituted carbon Oxidative migration from carbon to oxygen Hydrolysis gives the alcohol product. - Q6.Arrange the following monohydric alcohols in increasing order of the degree of carbon atom attached to the -OH group:
- A.
- B.
- C.
- D.
Show answer and explanation
Answer: A. , B. , C. , D.
The degree of the carbon atom attached to the group depends on how many other carbon atoms are directly bonded to that carbon.
- A carbon attached to other carbons is sometimes treated separately as methyl alcohol.
- Attached to carbon primary () alcohol
- Attached to carbons secondary () alcohol
- Attached to carbons tertiary () alcohol
Now examine each alcohol:
1.
- The carbon bearing is bonded to no other carbon atoms.
- This is the lowest degree.
2.
- The carbon bearing is the carbon.
- It is attached to only one other carbon.
- So it is a primary alcohol.
3.
- The carbon bearing is attached to two groups.
- So it is a secondary alcohol.
4.
- The carbon bearing is attached to three groups.
- So it is a tertiary alcohol.
Therefore, the increasing order of the degree of the carbon atom attached to the group is: - Q7.Arrange the following alcohols in increasing order of carbon chain length according to IUPAC nomenclature: Propan-1-ol, Methanol, Butan-1-ol, Ethanol.
- A.Butan-1-ol
- B.Methanol
- C.Propan-1-ol
- D.Ethanol
Show answer and explanation
Answer: A. Butan-1-ol, B. Methanol, C. Propan-1-ol, D. Ethanol
Methanol has 1 carbon, ethanol has 2 carbons, propan-1-ol has 3 carbons, and butan-1-ol has 4 carbons. Hence the increasing order of chain length is Methanol, Ethanol, Propan-1-ol, Butan-1-ol. - Q8.$Arrange the following alcohols in increasing order of branching in the carbon skeleton:
2-Methylpropan-2-ol
Butan-1-ol
2-Methylpropan-1-ol
Butan-2-ol$- A.2-Methylpropan-1-ol
- B.Butan-2-ol
- C.2-Methylpropan-2-ol
- D.Butan-1-ol
Show answer and explanation
Answer: A. 2-Methylpropan-1-ol, B. Butan-2-ol, C. 2-Methylpropan-2-ol, D. Butan-1-ol
Branching in the carbon skeleton depends on how the carbon atoms are connected, not on the position of the group.
Let us examine each alcohol:
1. Butan-1-ol: structure is a straight chain of four carbons.
This is an unbranched carbon skeleton.
2. Butan-2-ol: structure is
Although the group is on the second carbon, the carbon skeleton is still a straight chain of four carbons. So it is also unbranched.
3. 2-Methylpropan-1-ol: structure is
Here the main chain is propane with a methyl branch at carbon 2, so the carbon skeleton is branched.
4. 2-Methylpropan-2-ol: structure is
This also has the 2-methylpropane carbon skeleton, which is branched.
So, in increasing order of branching:
- first come the unbranched alcohols: Butan-1-ol and Butan-2-ol
- then the branched alcohols: 2-Methylpropan-1-ol and 2-Methylpropan-2-ol
Thus the correct order is:
Both butan-1-ol and butan-2-ol have the same unbranched carbon skeleton, and both 2-methylpropan-1-ol and 2-methylpropan-2-ol have the same branched carbon skeleton. This sequence places the straight-chain alcohols before the branched-chain alcohols. - Q9.Arrange the following alcohols in increasing order of molecular mass:
- A.
- B.
- C.
- D.
Show answer and explanation
Answer: A. , B. , C. , D.
To arrange the alcohols in increasing order of molecular mass, compare the number of carbon, hydrogen, and oxygen atoms in each compound.
These are monohydric alcohols, and their general formula is . As the number of carbon atoms increases, the molecular mass also increases.
Now calculate or compare each one:
- = methanol
Molecular mass
- = ethanol
Molecular mass
- = propanol
Molecular mass
- = butanol
Molecular mass
Thus, the increasing order of molecular mass is: - Q10.$Arrange the following names in the correct order from the shortest to the longest parent chain while keeping the -OH group as the principal functional group:
3-Methylpentan-2-ol
Ethanol
Propan-2-ol
Butan-1-ol$- A.Butan-1-ol
- B.3-Methylpentan-2-ol
- C.Ethanol
- D.Propan-2-ol
Show answer and explanation
Answer: A. Butan-1-ol, B. 3-Methylpentan-2-ol, C. Ethanol, D. Propan-2-ol
To arrange them from the shortest to the longest parent chain, count the number of carbon atoms in the parent chain that contains the group, since alcohol is the principal functional group.
- **Ethanol**: parent chain has **2 carbons**.
- **Propan-2-ol**: parent chain has **3 carbons**.
- **Butan-1-ol**: parent chain has **4 carbons**.
- **3-Methylpentan-2-ol**: the parent chain is **pentane**, so it has **5 carbons**. The methyl group is only a side branch and does not increase the parent-chain length.
Therefore, the correct order from shortest to longest parent chain is:
Practise all 438 Organic Chemistry – Alcohols & Phenols questions
Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.
More Chemistry chapters
- Analytical Chemistry MCQs1,034
- Applied Chemistry MCQs1,192
- Inorganic Chemistry – Bio-inorganic MCQs378
- Inorganic Chemistry – Metals MCQs1,044
- Inorganic Chemistry – Non-metals MCQs775
- Organic Chemistry – Aldehydes & Ketones MCQs208
- Organic Chemistry – Aromatic MCQs291
- Organic Chemistry – Carboxylic Acids & Derivatives MCQs701
- Organic Chemistry – Ethers MCQs276
- Organic Chemistry – General MCQs697
- Organic Chemistry – Haloalkanes & Haloarenes MCQs371
- Organic Chemistry – Hydrocarbons MCQs407
- Organic Chemistry – Nitro Compounds & Amines MCQs475
- Organic Chemistry – Organometallic MCQs324
- Physical Chemistry – Atomic Structure MCQs571
- Physical Chemistry – Basic Concepts MCQs165
- Physical Chemistry – Chemical Bonding MCQs659
- Physical Chemistry – Chemical Equilibrium MCQs377
- Physical Chemistry – Chemical Kinetics MCQs581
- Physical Chemistry – Electrochemistry MCQs549
- Physical Chemistry – Ionic Equilibrium MCQs519
- Physical Chemistry – Nuclear Chemistry MCQs255
- Physical Chemistry – Periodic Table MCQs596
- Physical Chemistry – Redox Reactions MCQs382
- Physical Chemistry – States of Matter (Gas) MCQs413
- Physical Chemistry – States of Matter (Liquid) MCQs306
- Physical Chemistry – States of Matter (Solid) MCQs269
- Physical Chemistry – Stoichiometry MCQs294
- Physical Chemistry – Thermodynamics MCQs752
- Physical Chemistry – Volumetric Analysis MCQs273
