Organic Chemistry – Haloalkanes & Haloarenes MCQ questions with answers

CEE Entrance · Chemistry. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 371 questions is free to practise on Prashnalaya.

Topics covered: Nomenclature, isomerism and classification of monohaloalkanes, Preparation and properties of chloroform and chlorobenzene, Preparation and properties of monohaloalkanes, SN1 and SN2 mechanisms

  1. Q1.
    Arrange the following monohaloalkanes in increasing order of the degree of the carbon atom bonded to halogen (from primary to tertiary):
    2-bromopropane
    1-bromopropane
    2-bromo-2-methylpropane
    • A.2-bromopropane
    • B.2-bromo-2-methylpropane
    • C.1-bromopropane
    Show answer and explanation

    Answer: A. 2-bromopropane, B. 2-bromo-2-methylpropane, C. 1-bromopropane

    The degree of the carbon bonded to halogen depends on how many other carbon atoms are attached to that carbon.

    - A (primary) haloalkane has the halogen-bearing carbon attached to one other carbon.
    - A (secondary) haloalkane has the halogen-bearing carbon attached to two other carbons.
    - A (tertiary) haloalkane has the halogen-bearing carbon attached to three other carbons.

    Now identify each compound:

    1. **1-bromopropane**: structure is . The carbon bonded to Br is the end carbon, and it is attached to only **one** other carbon. So it is **primary**.

    2. **2-bromopropane**: structure is . The carbon bonded to Br is the middle carbon, and it is attached to **two** other carbons. So it is **secondary**.

    3. **2-bromo-2-methylpropane**: structure is . The carbon bonded to Br is attached to **three** other carbons. So it is **tertiary**.

    Therefore, the increasing order from primary to tertiary is:

    **1-bromopropane 2-bromopropane 2-bromo-2-methylpropane**
  2. Q2.
    $Arrange the following monohaloalkanes in increasing order of IUPAC name complexity based on carbon chain length and branching:
    chloromethane
    1-chloropropane
    2-chloro-2-methylpropane
    1-chlorobutane$
    • A.1-chlorobutane
    • B.chloromethane
    • C.2-chloro-2-methylpropane
    • D.1-chloropropane
    Show answer and explanation

    Answer: A. 1-chlorobutane, B. chloromethane, C. 2-chloro-2-methylpropane, D. 1-chloropropane

    To arrange these monohaloalkanes in increasing order of IUPAC name complexity, we compare first the carbon chain length and then branching.

    1.
    - It has only 1 carbon atom.
    - This is the simplest haloalkane in the list.

    2.
    - It has a straight chain of 3 carbon atoms.
    - It is more complex than chloromethane because the parent chain is longer.

    3.
    - It has a straight chain of 4 carbon atoms.
    - Since its parent chain is longer than that of 1-chloropropane, its name is slightly more complex.

    4.
    - Although the longest chain has 3 carbons, it contains branching due to the methyl substituent.
    - Branched compounds generally have more complex IUPAC names than straight-chain compounds because extra substituents and locants must be included.

    So the increasing order is:
  3. Q3.
    Arrange the following molecular formulas in increasing order of the number of possible structural isomers of monohaloalkanes:
    • A.
    • B.
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. , C. , D.

    To arrange them in increasing order, count the number of distinct structural isomers possible for each monohaloalkane formula.

    A monohaloalkane is formed by replacing one H atom of an alkane by one Cl atom. Different carbon skeletons and different positions of Cl on non-equivalent carbon atoms give different structural isomers.

    1.

    This is chloroethane only:
    -

    Both carbon positions are equivalent in ethane, so only structural isomer is possible.

    2.

    Possible isomers are:
    - = 1-chloropropane
    - = 2-chloropropane

    So, total structural isomers .

    3.

    Here we must consider both butane and 2-methylpropane skeletons.

    From butane:
    - 1-chlorobutane
    - 2-chlorobutane

    From 2-methylpropane:
    - 1-chloro-2-methylpropane
    - 2-chloro-2-methylpropane

    So, total structural isomers .

    4.

    Now there are three carbon skeletons: pentane, 2-methylbutane, and 2,2-dimethylpropane.

    From pentane:
    - 1-chloropentane
    - 2-chloropentane
    - 3-chloropentane

    From 2-methylbutane:
    - 1-chloro-2-methylbutane
    - 1-chloro-3-methylbutane
    - 2-chloro-2-methylbutane
    - 2-chloro-3-methylbutane

    From 2,2-dimethylpropane:
    - 1-chloro-2,2-dimethylpropane

    So, total structural isomers .

    Thus the numbers of structural isomers are:
    -
    -
    -
    -

    Therefore, the increasing order is:
  4. Q4.
    Arrange the following monohaloalkanes in increasing order of branching in the carbon skeleton:
    1-chlorobutane
    1-chloro-2-methylpropane
    2-chloro-2-methylpropane
    1-chloropentane
    • A.2-chloro-2-methylpropane
    • B.1-chlorobutane
    • C.1-chloropentane
    • D.1-chloro-2-methylpropane
    Show answer and explanation

    Answer: A. 2-chloro-2-methylpropane, B. 1-chlorobutane, C. 1-chloropentane, D. 1-chloro-2-methylpropane

    Branching depends on how many side chains are present in the carbon skeleton, not on the total length of the straight chain.

    Let us examine each compound:

    1. : carbon skeleton is butane, which is a straight-chain alkane. So it is unbranched.
    2. : carbon skeleton is pentane, which is also a straight-chain alkane. So it is also unbranched.
    3. : this is derived from 2-methylpropane, so the carbon skeleton has one branch.
    4. : this is also derived from 2-methylpropane. Its carbon skeleton has one branch as well, and among the given compounds it is the most compact branched structure.

    Thus, the straight-chain compounds come first, followed by the branched compounds. Between the two unbranched compounds, and , both have zero branching, so they are placed before the branched ones. Between the branched compounds, comes before in the usual increasing arrangement used here.

    Therefore, the increasing order of branching is:
  5. Q5.
    The following names represent isomeric monobromobutanes. Arrange them in the order of increasing substitution of the carbon atom bearing bromine:
    1-bromobutane
    2-bromobutane
    1-bromo-2-methylpropane
    2-bromo-2-methylpropane
    • A.2-bromobutane
    • B.1-bromo-2-methylpropane
    • C.2-bromo-2-methylpropane
    • D.1-bromobutane
    Show answer and explanation

    Answer: A. 2-bromobutane, B. 1-bromo-2-methylpropane, C. 2-bromo-2-methylpropane, D. 1-bromobutane

    Substitution of the carbon bearing bromine depends on how many carbon atoms are directly attached to that particular carbon.

    Let us classify each compound by looking only at the carbon bonded to Br:

    1. -bromobutane: structure is
    - The carbon bearing Br is the terminal carbon.
    - It is attached to only one other carbon.
    - So it is a (primary) alkyl bromide.

    2. -bromo--methylpropane: structure is
    - The carbon bearing Br is again the carbon.
    - It is attached to only one other carbon.
    - So it is also (primary).

    3. -bromobutane: structure is
    - The carbon bearing Br is attached to two other carbons.
    - So it is (secondary).

    4. -bromo--methylpropane: structure is
    - The carbon bearing Br is attached to three other carbons.
    - So it is (tertiary).

    Thus, increasing substitution is:

    primary secondary tertiary

    Among the two primary bromides, -bromobutane and -bromo--methylpropane, the carbon bearing bromine is primary in both cases. If they must be placed in sequence, the less branched primary carbon environment is taken before the more branched one.

    Therefore, the order is:



    So the correct arrangement is:
    -bromobutane, -bromo--methylpropane, -bromobutane, -bromo--methylpropane.
  6. Q6.
    Arrange the following monohaloalkanes in increasing order of boiling point:
    • A.
    • B.
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. , C. , D.

    For methyl halides having the same alkyl group , the main factor affecting boiling point is the strength of intermolecular forces. As we move from fluorine to iodine, the size and mass of the halogen atom increase, and its electron cloud becomes more easily polarizable. This increases van der Waals (dispersion) forces between molecules.

    So, although polarity also plays a role, the increase in molecular mass and polarizability from to causes the boiling point to rise in the order:



    Thus, the increasing order of boiling point is:

    , , , .
  7. Q7.
    Arrange the following methods for preparing chloroethane from ethanol in the correct sequence of practical steps using : Addition of thionyl chloride to ethanol Formation of intermediate alkyl chlorosulfite Substitution to form chloroethane Escape of gaseous by-products
    • A.Escape of gaseous by-products
    • B.Substitution to form chloroethane
    • C.Addition of thionyl chloride to ethanol
    • D.Formation of intermediate alkyl chlorosulfite
    Show answer and explanation

    Answer: A. Escape of gaseous by-products, B. Substitution to form chloroethane, C. Addition of thionyl chloride to ethanol, D. Formation of intermediate alkyl chlorosulfite

    When ethanol reacts with , thionyl chloride is first added to ethanol. This gives an alkyl chlorosulfite intermediate. Then substitution occurs to produce chloroethane. Finally, gaseous and escape, helping drive the reaction forward. So the proper sequence is Addition of thionyl chloride to ethanol, Formation of intermediate alkyl chlorosulfite, Substitution to form chloroethane, Escape of gaseous by-products.
  8. Q8.
    Arrange the following monohaloalkanes in increasing order of reactivity towards nucleophilic substitution by aqueous :
    • A.
    • B.
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. , C. , D.

    For nucleophilic substitution of monohaloalkanes by aqueous , the hydroxide ion acts as the nucleophile and replaces the halogen atom. The reactivity mainly depends on how easily the bond breaks, where X is the halogen.

    The weaker the bond, the easier it is for the halide ion to leave, so the faster the substitution reaction occurs.

    Bond strength order is:


    So, leaving group ability is the reverse:


    That means:
    - is least reactive because the bond is very strong.
    - is more reactive than fluoroethane.
    - is more reactive than chloroethane.
    - is most reactive because the bond is weakest and is the best leaving group.

    Therefore, the increasing order of reactivity towards nucleophilic substitution by aqueous is:
  9. Q9.
    Arrange the following alkyl halides in increasing order of ease of preparation from the corresponding alcohols using hydrogen halides: Alkyl fluoride, Alkyl chloride, Alkyl bromide, Alkyl iodide.
    • A.Alkyl chloride
    • B.Alkyl iodide
    • C.Alkyl fluoride
    • D.Alkyl bromide
    Show answer and explanation

    Answer: A. Alkyl chloride, B. Alkyl iodide, C. Alkyl fluoride, D. Alkyl bromide

    Alcohols react with hydrogen halides to form alkyl halides :



    The ease of this conversion depends mainly on:
    1. the strength of the hydrogen halide acid,
    2. how easily the halide ion attacks the carbon,
    3. how favorable the overall substitution reaction is.

    Among the hydrogen halides, the acid strength increases in the order:



    Also, in these reactions, is the least effective halide for preparing alkyl fluoride from alcohols, while is the most effective. This is because is weak and the formation of alkyl fluorides directly from alcohols using is difficult. On the other hand, reacts most readily, followed by , then .

    Therefore, the increasing order of ease of preparation of alkyl halides from the corresponding alcohols using hydrogen halides is:



    So the correct arrangement is:

    Alkyl fluoride Alkyl chloride Alkyl bromide Alkyl iodide.
  10. Q10.
    Arrange the following monohaloalkanes in increasing order of density:
    • A.
    • B.
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. , C. , D.

    For monohaloalkanes, density depends on both molecular mass and molecular volume. In general, replacing the halogen by a heavier one increases density, so for the methyl halides:



    Now compare and . Although has greater molar mass, it also has a larger carbon chain, which increases volume enough that its density is slightly lower than that of .

    Typical densities support this:
    -
    -
    -
    - is the highest among these

    Therefore, the increasing order of density is:

Practise all 371 Organic Chemistry – Haloalkanes & Haloarenes questions

Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.

Start practising free

More Chemistry chapters

All CEE Entrance subjects →