Physical Chemistry – Electrochemistry MCQ questions with answers

CEE Entrance · Chemistry. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 549 questions is free to practise on Prashnalaya.

Topics covered: Commercial cells: primary and secondary cells, Electrochemical series and its applications, Electrolytic cell and qualitative/quantitative aspects of electrolysis (Faraday's laws), Galvanic cell and its standard EMF, Hydrogen-oxygen fuel cell, Standard electrode potential; standard hydrogen electrode; calomel electrode

  1. Q1.
    Arrange the following electrodes in increasing order of their standard reduction potential value:
    • A.
    • B.
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. , C. , D.

    To arrange the electrodes in increasing order of standard reduction potential, we compare their standard electrode potential values .

    The standard reduction potentials are:

    - ,
    - ,
    - ,
    - ,

    Increasing order means from the most negative value to the most positive value:



    So the correct order is:



    Thus, the arrangement in increasing order of standard reduction potential is:

    , , ,
  2. Q2.
    $Arrange the following species according to the sequence in which they participate in water formation at the cathode of an acidic hydrogen-oxygen fuel cell.

    tons from anode side
    Oxygen molecules at cathode
    Electrons arriving through external circuit
    Water molecules$
    • A.Water molecules
    • B.Electrons arriving through external circuit
    • C.tons from anode side
    • D.Oxygen molecules at cathode
    Show answer and explanation

    Answer: A. Water molecules, B. Electrons arriving through external circuit, C. tons from anode side, D. Oxygen molecules at cathode

    In an acidic hydrogen-oxygen fuel cell, the cathode reaction is:

    This shows the sequence of participation in water formation at the cathode:

    1. must be present at the cathode.
    2. ions come from the anode side through the electrolyte. The item written as "tons from anode side" clearly refers to protons from the anode side.
    3. Electrons arrive through the external circuit.
    4. These combine to form water molecules.

    So the correct order is:
    Oxygen molecules at cathode tons from anode side Electrons arriving through external circuit Water molecules.
  3. Q3.
    $Arrange the following half-cell events of a hydrogen-oxygen fuel cell in the correct electrochemical order starting from oxidation at the anode.

    actions move through the electrolyte

    ydrogen loses electrons at the anode
    Oxygen gains electrons at the cathode
    Water is produced$
    • A.Water is produced
    • B.Oxygen gains electrons at the cathode
    • C.actions move through the electrolyte
    • D.ydrogen loses electrons at the anode
    Show answer and explanation

    Answer: A. Water is produced, B. Oxygen gains electrons at the cathode, C. actions move through the electrolyte, D. ydrogen loses electrons at the anode

    In a hydrogen-oxygen fuel cell, the process begins at the anode with oxidation of hydrogen. The anode reaction is:



    So the first event is that hydrogen loses electrons at the anode.

    The hydrogen ions produced then pass through the electrolyte toward the cathode. Therefore, the next step is that ions move through the electrolyte.

    At the cathode, oxygen accepts electrons. In acidic medium, the cathode reaction is:



    So after ion movement, oxygen gains electrons at the cathode.

    Finally, as a result of the cathode reaction, water is formed. Hence water is produced at the end.

    Therefore, the correct electrochemical order is:

    1. hydrogen loses electrons at the anode
    2. ions move through the electrolyte
    3. oxygen gains electrons at the cathode
    4. water is produced
  4. Q4.
    $Arrange the following features of a hydrogen-oxygen fuel cell in the correct logical order from reactants to practical outcome.
    Formation of

    ter as the main product
    Supply of pure hydrogen and oxygen
    Generation of electrical energy with high efficiency
    Cleaner application in spacecraft and vehicles$
    • A.Cleaner application in spacecraft and vehicles
    • B.Generation of electrical energy with high efficiency
    • C.$Formation of

      ter as the main product$
    • D.Supply of pure hydrogen and oxygen
    Show answer and explanation

    Answer: A. Cleaner application in spacecraft and vehicles, B. Generation of electrical energy with high efficiency, C. $Formation of

    ter as the main product$
    , D. Supply of pure hydrogen and oxygen

    In a hydrogen-oxygen fuel cell, the process starts with the reactants being fed into the cell, so the first step is the supply of pure hydrogen and oxygen. Inside the fuel cell, these gases undergo an electrochemical reaction. The main purpose of this reaction is to convert chemical energy directly into electrical energy, so electrical energy is generated with high efficiency during operation. At the same time, the reaction product formed is water, according to the overall reaction:



    Because the fuel cell produces electricity efficiently and its main product is water, it is considered a clean technology. Therefore, its practical outcome is cleaner application in spacecraft and vehicles.

    So the correct logical order is:
    1. Supply of pure hydrogen and oxygen
    2. Generation of electrical energy with high efficiency
    3. Formation of water as the main product
    4. Cleaner application in spacecraft and vehicles
  5. Q5.
    Arrange the following steps involved in writing the correct standard cell notation for a galvanic cell from left to right: Write the anode half-cell, Write salt bridge as ||, Write the cathode half-cell, Place single vertical lines between different phases.
    • A.Write salt bridge as ||
    • B.Write the cathode half-cell
    • C.Place single vertical lines between different phases
    • D.Write the anode half-cell
    Show answer and explanation

    Answer: A. Write salt bridge as ||, B. Write the cathode half-cell, C. Place single vertical lines between different phases, D. Write the anode half-cell

    The standard notation for a galvanic cell is written from left to right as:



    The rules used are:
    1. The anode half-cell is written on the left because oxidation occurs at the anode.
    2. A single vertical line is used to separate different phases within the same half-cell, such as a solid electrode and its ionic solution.
    3. A double vertical line represents the salt bridge or porous partition between the two half-cells.
    4. The cathode half-cell is written on the right because reduction occurs at the cathode.

    So the correct left-to-right order is:
    - Write the anode half-cell
    - Place single vertical lines between different phases
    - Write salt bridge as ||
    - Write the cathode half-cell
  6. Q6.
    Arrange the following dry cell components in the correct order from the center of the cell to the outermost part: Zinc container, Carbon rod, Paste of and , Mixture of and carbon powder.
    • A.Paste of and
    • B.Carbon rod
    • C.Zinc container
    • D.Mixture of and carbon powder
    Show answer and explanation

    Answer: A. Paste of and , B. Carbon rod, C. Zinc container, D. Mixture of and carbon powder

    $In a Leclanche dry cell, the parts are arranged in layers from the center outward.

    1. Carbon rod is at the center and acts as the positive electrode collector.
    2. Mixture of and carbon powder surrounds the carbon rod. This acts as the depolarizer and helps in conduction.
    3. Paste of and lies outside that mixture and serves as the electrolyte paste.
    4. Zinc container is the outermost part and acts as the negative electrode (anode).

    So, from the center to the outermost part, the correct order is: Carbon rod → Mixture of and carbon powder → Paste of and → Zinc container.$
  7. Q7.
    Arrange the following steps in the charging of a lead-acid accumulator in the correct sequence: External DC source is connected opposite to cell direction on negative plate changes to on positive plate changes to Concentration of increases
    • A.Concentration of increases
    • B. on positive plate changes to
    • C.External DC source is connected opposite to cell direction
    • D. on negative plate changes to
    Show answer and explanation

    Answer: A. Concentration of increases, B. on positive plate changes to , C. External DC source is connected opposite to cell direction, D. on negative plate changes to

    In a lead-acid accumulator, charging is the reverse of discharging. So the first step is to connect an external DC source in the opposite direction to force current backward through the cell.

    During charging, the lead sulfate formed on both plates during discharge is converted back to the original active materials:
    - At the negative plate, gains electrons and changes back to lead, .
    - At the positive plate, is oxidized and changes back to lead dioxide, .

    These changes may be represented as:
    - Negative plate:
    - Positive plate:

    As charging continues, sulfate ions return to the electrolyte and sulfuric acid is regenerated. Therefore, the concentration of increases at the end.

    So the correct sequence is:
    1. External DC source is connected opposite to cell direction
    2. on negative plate changes to
    3. on positive plate changes to
    4. Concentration of increases
  8. Q8.
    Arrange the following commercial cells in increasing order of rechargeability and repeated use in practical applications: Dry cell Mercury cell Lead-acid accumulator Nickel-cadmium cell
    • A.Lead-acid accumulator
    • B.Mercury cell
    • C.Nickel-cadmium cell
    • D.Dry cell
    Show answer and explanation

    Answer: A. Lead-acid accumulator, B. Mercury cell, C. Nickel-cadmium cell, D. Dry cell

    Rechargeability means the ability of a cell to be used again by recharging it after discharge.

    Commercial cells are of two main types:
    1. Primary cells: These are not rechargeable and are generally used only once.
    2. Secondary cells: These are rechargeable and can be used repeatedly.

    Now classify the given cells:

    - Dry cell: It is a primary cell, so it is not rechargeable.
    - Mercury cell: It is also a primary cell, so it is not rechargeable.
    - Lead-acid accumulator: It is a secondary cell, so it is rechargeable and widely used repeatedly.
    - Nickel-cadmium cell: It is also a secondary cell and can be recharged many times, usually more conveniently and repeatedly than a lead-acid cell.

    Therefore, in increasing order of rechargeability and repeated practical use:



    So the correct arrangement is:

    Dry cell, Mercury cell, Lead-acid accumulator, Nickel-cadmium cell.
  9. Q9.
    Arrange the following statements related to discharge of a lead-acid battery in the correct order: Both electrodes gradually become coated with Battery supplies current to an external circuit Sulfuric acid concentration decreases Cell voltage falls on prolonged use
    • A.Sulfuric acid concentration decreases
    • B.Cell voltage falls on prolonged use
    • C.Battery supplies current to an external circuit
    • D.Both electrodes gradually become coated with
    Show answer and explanation

    Answer: A. Sulfuric acid concentration decreases, B. Cell voltage falls on prolonged use, C. Battery supplies current to an external circuit, D. Both electrodes gradually become coated with

    During discharge of a lead-acid battery, the battery first acts as a source of electrical energy and sends current through the external circuit. At the electrodes, the discharge reactions occur:

    At the negative plate:


    At the positive plate:


    Overall reaction:


    From this overall reaction, both electrodes are gradually converted into , so both plates become coated with lead sulfate. At the same time, is consumed and water is formed, so the concentration of sulfuric acid decreases. As discharge continues for a longer time, the acid becomes more dilute and the reactants are used up progressively, causing the cell voltage to fall.

    So the correct order is:
    1. Battery supplies current to an external circuit
    2. Both electrodes gradually become coated with
    3. Sulfuric acid concentration decreases
    4. Cell voltage falls on prolonged use
  10. Q10.
    Arrange the following commercial cells in decreasing order of their typical emf values: Lead-acid cell Dry cell Mercury cell Nickel-cadmium cell
    • A.Nickel-cadmium cell
    • B.Mercury cell
    • C.Lead-acid cell
    • D.Dry cell
    Show answer and explanation

    Answer: A. Nickel-cadmium cell, B. Mercury cell, C. Lead-acid cell, D. Dry cell

    To arrange the commercial cells in decreasing order of their typical emf values, compare their usual voltages:

    - Lead-acid cell
    - Dry cell
    - Mercury cell
    - Nickel-cadmium cell

    Now arrange from highest emf to lowest emf:



    So the correct decreasing order is:

    Lead-acid cell Dry cell Mercury cell Nickel-cadmium cell

    Therefore, the required sequence is:

    Lead-acid cell, Dry cell, Mercury cell, Nickel-cadmium cell.

Practise all 549 Physical Chemistry – Electrochemistry questions

Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.

Start practising free

More Chemistry chapters

All CEE Entrance subjects →