Organic Chemistry – Ethers MCQ questions with answers
CEE Entrance · Chemistry. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 276 questions is free to practise on Prashnalaya.
Topics covered: Nomenclature, classification and isomerism of ethers, Williamson's synthesis; chemical properties of diethyl ether
- Q1.Arrange the following steps in the correct order for Williamson's synthesis of diethyl ether from ethanol: formation of sodium ethoxide, treatment with bromoethane, deprotonation of ethanol by sodium metal, nucleophilic substitution to form ether.
- A.formation of sodium ethoxide
- B.deprotonation of ethanol by sodium metal
- C.nucleophilic substitution to form ether
- D.treatment with bromoethane
Show answer and explanation
Answer: A. formation of sodium ethoxide, B. deprotonation of ethanol by sodium metal, C. nucleophilic substitution to form ether, D. treatment with bromoethane
In Williamson's synthesis, an ether is prepared by reacting an alkoxide ion with a suitable alkyl halide.
For diethyl ether from ethanol, the sequence is:
1. Deprotonation of ethanol by sodium metal
Ethanol reacts with sodium metal, and the acidic hydrogen of the group is removed.
2. Formation of sodium ethoxide
The product formed in the first step is sodium ethoxide, , which is the required alkoxide nucleophile.
3. Treatment with bromoethane
Sodium ethoxide is then mixed with bromoethane, which serves as the alkyl halide substrate.
4. Nucleophilic substitution to form ether
The ethoxide ion attacks bromoethane in an reaction, displacing bromide ion and forming diethyl ether.
So the correct order is: deprotonation of ethanol by sodium metal formation of sodium ethoxide treatment with bromoethane nucleophilic substitution to form ether. - Q2.Arrange the following alkyl halides in increasing suitability for Williamson's synthesis with sodium ethoxide: tert-butyl bromide, ethyl bromide, methyl bromide, isopropyl bromide.
- A.ethyl bromide
- B.tert-butyl bromide
- C.isopropyl bromide
- D.methyl bromide
Show answer and explanation
Answer: A. ethyl bromide, B. tert-butyl bromide, C. isopropyl bromide, D. methyl bromide
Williamson's synthesis proceeds best by mechanism, so less hindered alkyl halides react more easily. Tertiary halides are poorest because elimination dominates. Secondary halides are less suitable than primary, and methyl is best. Therefore the increasing suitability is tert-butyl bromide < isopropyl bromide < ethyl bromide < methyl bromide. - Q3.Arrange the following species in the correct sequence involved in preparing diethyl ether by Williamson's synthesis: , , , .
- A.
- B.
- C.
- D.
Show answer and explanation
Answer: A. , B. , C. , D.
Ethanol is first converted into sodium ethoxide. Then sodium ethoxide reacts with bromoethane to form diethyl ether. So the correct order is ethanol, sodium ethoxide, bromoethane, and then diethyl ether. - Q4.Arrange the following ethers in increasing tendency to undergo cleavage with concentrated HI: diethyl ether, methyl tert-butyl ether, diphenyl ether, anisole.
- A.anisole
- B.methyl tert-butyl ether
- C.diphenyl ether
- D.diethyl ether
Show answer and explanation
Answer: A. anisole, B. methyl tert-butyl ether, C. diphenyl ether, D. diethyl ether
Diphenyl ether is most resistant because cleavage of the aryl-oxygen bond is very difficult. Anisole also contains an aryl-oxygen bond and is less reactive than simple dialkyl ether. Diethyl ether is cleaved more readily by HI. Methyl tert-butyl ether is cleaved very easily because after protonation, cleavage can lead to stable tertiary carbocation formation or favorable bond breaking. Thus the increasing order is diphenyl ether < anisole < diethyl ether < methyl tert-butyl ether. - Q5.Arrange the following observations in correct order when excess HI reacts with diethyl ether: formation of ethanol and ethyl iodide, protonation of ether oxygen, conversion of ethanol into ethyl iodide, final products become ethyl iodide and water.
- A.conversion of ethanol into ethyl iodide
- B.formation of ethanol and ethyl iodide
- C.final products become ethyl iodide and water
- D.protonation of ether oxygen
Show answer and explanation
Answer: A. conversion of ethanol into ethyl iodide, B. formation of ethanol and ethyl iodide, C. final products become ethyl iodide and water, D. protonation of ether oxygen
Diethyl ether first gets protonated by HI. Then one ethyl group is displaced by iodide ion, producing ethanol and ethyl iodide. In excess HI, the ethanol formed reacts further to give ethyl iodide and water. Therefore the order is protonation, formation of ethanol and ethyl iodide, conversion of ethanol, and final products ethyl iodide plus water. - Q6.Arrange the following compounds in increasing boiling point: , , , .
- A.
- B.
- C.
- D.
Show answer and explanation
Answer: A. , B. , C. , D.
Butane has only weak dispersion forces, so it has the lowest boiling point. Dimethyl ether is polar and boils higher than butane. Diethyl ether has greater molecular mass and stronger intermolecular forces than dimethyl ether, so its boiling point is higher. Ethanol forms hydrogen bonding, so it has the highest boiling point. Hence the order is butane < dimethyl ether < diethyl ether < ethanol. - Q7.Arrange the following in increasing ease of cleavage by HI according to the bond broken after protonation: , , , .
- A.
- B.
- C.
- D.
Show answer and explanation
Answer: A. , B. , C. , D.
Anisole is least easily cleaved because the aryl-oxygen bond is difficult to break. Diethyl ether is a simple dialkyl ether and cleaves normally. Methyl ethyl ether is often cleaved preferentially at the methyl side by , making cleavage easier than in symmetrical diethyl ether. tert-Butyl methyl ether cleaves most readily because tertiary carbocation formation is favored after protonation. Therefore the increasing order is anisole < diethyl ether < methyl ethyl ether < tert-butyl methyl ether. - Q8.Arrange the following reagents and conditions in the correct sequence for laboratory preparation of diethyl ether using Williamson's method: dry ether-free setup, sodium metal with absolute ethanol, formation of sodium ethoxide solution, addition of ethyl halide and heating.
- A.formation of sodium ethoxide solution
- B.dry ether-free setup
- C.addition of ethyl halide and heating
- D.sodium metal with absolute ethanol
Show answer and explanation
Answer: A. formation of sodium ethoxide solution, B. dry ether-free setup, C. addition of ethyl halide and heating, D. sodium metal with absolute ethanol
In Williamson’s ether synthesis, diethyl ether is prepared by first generating sodium ethoxide and then allowing it to react with an ethyl halide.
The correct sequence is:
1. dry ether-free setup
The apparatus must be completely dry because sodium metal reacts violently with water, and moisture would also destroy sodium ethoxide.
2. sodium metal with absolute ethanol
Sodium is added to absolute ethanol. Absolute ethanol is used so that no water is present.
3. formation of sodium ethoxide solution
Sodium reacts with ethanol to form sodium ethoxide:
4. addition of ethyl halide and heating
The sodium ethoxide then reacts with ethyl halide on heating to form diethyl ether:
where is a halogen such as Cl, Br, or I.
Thus, the proper order is preparation of a dry setup, reaction of sodium with absolute ethanol, formation of sodium ethoxide, and finally addition of ethyl halide with heating to obtain diethyl ether. - Q9.Arrange the following compounds in increasing ability to act as hydrogen bond acceptor in common organic interactions: water, diethyl ether, ethanol, protonated diethyl ether.
- A.ethanol
- B.protonated diethyl ether
- C.water
- D.diethyl ether
Show answer and explanation
Answer: A. ethanol, B. protonated diethyl ether, C. water, D. diethyl ether
Protonated diethyl ether has no free neutral lone-pair behavior available like a normal base, so it is the weakest hydrogen bond acceptor. Diethyl ether can accept hydrogen bond through oxygen lone pairs. Ethanol also accepts through oxygen, generally better in many simple comparisons because of strong polarity. Water has two lone pairs and strong polarity, making it the strongest acceptor among these common molecules. Thus the increasing order is protonated diethyl ether < diethyl ether < ethanol < water. - Q10.Arrange the following statements in the correct logical order to explain why diethyl ether is used as an extraction solvent in laboratories: it dissolves many organic compounds, it is immiscible only slightly with water, it forms a separate organic layer, the desired organic substance can be separated easily.
- A.it forms a separate organic layer
- B.the desired organic substance can be separated easily
- C.it dissolves many organic compounds
- D.it is immiscible only slightly with water
Show answer and explanation
Answer: A. it forms a separate organic layer, B. the desired organic substance can be separated easily, C. it dissolves many organic compounds, D. it is immiscible only slightly with water
Diethyl ether is only slightly miscible with water, so when mixed with aqueous solution it forms a separate organic layer. It can dissolve many organic substances, so the compound of interest moves into that ether layer. This makes separation easy. Therefore the correct logical order is slight miscibility with water, separate layer formation, dissolution of organic compounds, and easy separation.
Practise all 276 Organic Chemistry – Ethers questions
Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.
More Chemistry chapters
- Analytical Chemistry MCQs1,034
- Applied Chemistry MCQs1,192
- Inorganic Chemistry – Bio-inorganic MCQs378
- Inorganic Chemistry – Metals MCQs1,044
- Inorganic Chemistry – Non-metals MCQs775
- Organic Chemistry – Alcohols & Phenols MCQs438
- Organic Chemistry – Aldehydes & Ketones MCQs208
- Organic Chemistry – Aromatic MCQs291
- Organic Chemistry – Carboxylic Acids & Derivatives MCQs701
- Organic Chemistry – General MCQs697
- Organic Chemistry – Haloalkanes & Haloarenes MCQs371
- Organic Chemistry – Hydrocarbons MCQs407
- Organic Chemistry – Nitro Compounds & Amines MCQs475
- Organic Chemistry – Organometallic MCQs324
- Physical Chemistry – Atomic Structure MCQs571
- Physical Chemistry – Basic Concepts MCQs165
- Physical Chemistry – Chemical Bonding MCQs659
- Physical Chemistry – Chemical Equilibrium MCQs377
- Physical Chemistry – Chemical Kinetics MCQs581
- Physical Chemistry – Electrochemistry MCQs549
- Physical Chemistry – Ionic Equilibrium MCQs519
- Physical Chemistry – Nuclear Chemistry MCQs255
- Physical Chemistry – Periodic Table MCQs596
- Physical Chemistry – Redox Reactions MCQs382
- Physical Chemistry – States of Matter (Gas) MCQs413
- Physical Chemistry – States of Matter (Liquid) MCQs306
- Physical Chemistry – States of Matter (Solid) MCQs269
- Physical Chemistry – Stoichiometry MCQs294
- Physical Chemistry – Thermodynamics MCQs752
- Physical Chemistry – Volumetric Analysis MCQs273
