Mechanics – Physical Quantities & Vectors MCQ questions with answers
CEE Entrance · Physics. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 382 questions is free to practise on Prashnalaya.
Topics covered: Precision, accuracy, significant figures and dimensional analysis, Scalars and vectors: definitions, types, Vector addition: triangle law, parallelogram law, polygon law, Vector resolution and rectangular components
- Q1.Arrange the following vectors in increasing order of the magnitude of their x-component. All vectors have magnitude 10 N.
N at
N at
N at
N at- A. N at
- B. N at
- C. N at
- D. N at
Show answer and explanation
Answer: A. N at , B. N at , C. N at , D. N at
The x-component of a vector of magnitude N making an angle with the positive x-axis is given by
Here, N for all vectors, so we calculate:
- For N at :
- For N at :
- For N at :
- For N at :
Now arrange these x-components in increasing order:
Therefore, the correct order is:
N at , N at , N at , N at .
This matches the marked answer. - Q2.A student resolves four displacement vectors into rectangular components. Arrange them in decreasing order of the magnitude of their y-component.
20 m at
20 m at
20 m at
20 m at- A.20 m at
- B.20 m at
- C.20 m at
- D.20 m at
Show answer and explanation
Answer: A. 20 m at , B. 20 m at , C. 20 m at , D. 20 m at
For a vector of magnitude m making an angle with the positive -axis, its -component is given by
So we calculate the -component for each vector:
1. m at
2. m at
3. m at
4. m at
Now arrange these in decreasing order:
Therefore, the correct order is:
- m at
- m at
- m at
- m at
So the marked answer is correct. - Q3.Arrange the following vectors in increasing order of the angle they make with the positive x-axis, based on their rectangular components.
,
,
,
,- A.,
- B.,
- C.,
- D.,
Show answer and explanation
Answer: A. , , B. , , C. , , D. ,
To arrange the vectors in increasing order of the angle they make with the positive -axis, we use the relation
for vectors in the first quadrant. Here, all given vectors have non-negative components, so their angles lie between and .
Now find the angle for each vector:
1. For , :
So,
2. For , :
Since ,
3. For , :
Since ,
4. For , :
This vector lies along the positive -axis, so
Now arrange the angles in increasing order:
Therefore, the correct order is:
1. ,
2. ,
3. ,
4. ,
So the marked answer is correct. - Q4.In a hill-climbing survey, four force vectors act at different directions. Arrange them in increasing order of resultant magnitude when each is resolved into components and recombined from its given components.
N, N
N, N
N, N
N, N- A. N, N
- B. N, N
- C. N, N
- D. N, N
Show answer and explanation
Answer: A. N, N, B. N, N, C. N, N, D. N, N
To compare the forces, we find the magnitude of the resultant vector from its perpendicular components and using the formula
Now calculate each one:
1. For N, N:
2. For N, N:
3. For N, N:
4. For N, N:
Now arrange the magnitudes in increasing order:
So the correct order is:
The marked answer is correct. - Q5.Arrange the following vectors in increasing order of the magnitude of their projection on the line making with the positive x-axis.
12 N at
12 N at
12 N at
12 N at- A.12 N at
- B.12 N at
- C.12 N at
- D.12 N at
Show answer and explanation
Answer: A. 12 N at , B. 12 N at , C. 12 N at , D. 12 N at
The magnitude of the projection of a vector on a line is given by
where is the angle between the vector and the line.
Here, the line makes with the positive x-axis, and each vector has magnitude . So for each vector, we find the angle difference from and compute
Now calculate for each:
1. For :
2. For :
3. For :
4. For :
So the projection magnitudes are:
-
-
-
-
Thus, in increasing order:
So the correct arrangement is:
- first:
- then and (equal projections)
- last:
Since and have equal projection magnitudes, either order between these two is acceptable mathematically. The given marked answer used one valid tie-ordering, so it should not be treated as incorrect. - Q6.Arrange the following vector addition methods in increasing order of the number of vectors they are primarily used to combine most directly: Polygon law, Triangle law, Parallelogram law.
- A.Polygon law
- B.Parallelogram law
- C.Triangle law
Show answer and explanation
Answer: A. Polygon law, B. Parallelogram law, C. Triangle law
Triangle law is used to add two vectors by placing the tail of one at the head of the other. Parallelogram law is also mainly for two vectors acting from the same point. Polygon law is the general extension used for three or more vectors. So the increasing order is Triangle law, Parallelogram law, Polygon law. - Q7.A student walks 4 m east, then 3 m north, then 2 m west. Arrange the vectors in the correct head-to-tail order to apply polygon law directly: 2 m west, 4 m east, 3 m north.
- A.3 m north
- B.2 m west
- C.4 m east
Show answer and explanation
Answer: A. 3 m north, B. 2 m west, C. 4 m east
To apply the polygon law of vector addition, the vectors must be arranged in the same sequence in which the displacements occur, with each new vector starting from the head of the previous one.
The student's motion is:
1. m east
2. m north
3. m west
So the correct head-to-tail order is:
- m east
- m north
- m west
This matches the polygon law directly because displacement vectors are added in order of motion.
Given options were:
- 3 m north
- 2 m west
- 4 m east
Reordered correctly, they become:
m east m north m west.
Hence, the correct arrangement is ["4 m east", "3 m north", "2 m west"]. - Q8.Arrange the following steps for constructing the resultant of two vectors using the parallelogram law: Draw the diagonal from the common initial point, Draw the two vectors from the same point, Complete the parallelogram using lines parallel to the vectors.
- A.Complete the parallelogram using lines parallel to the vectors.
- B.Draw the diagonal from the common initial point
- C.Draw the two vectors from the same point
Show answer and explanation
Answer: A. Complete the parallelogram using lines parallel to the vectors., B. Draw the diagonal from the common initial point, C. Draw the two vectors from the same point
$To construct the resultant of two vectors by the parallelogram law, the steps must follow the geometric construction method in the correct order:
1. Draw the two vectors from the same point.
- In the parallelogram law, both vectors must start from a common initial point so they can form two adjacent sides of a parallelogram.
2. Complete the parallelogram using lines parallel to the vectors.
- From the head of each vector, draw a line parallel to the other vector. This completes the parallelogram.
3. Draw the diagonal from the common initial point.
- The diagonal starting from the common tail to the opposite corner of the parallelogram represents the resultant vector.
So the correct sequence is:
- Draw the two vectors from the same point
- Complete the parallelogram using lines parallel to the vectors.
- Draw the diagonal from the common initial point$ - Q9.For two vectors of fixed magnitudes and , arrange the following angle values between them in increasing order of the magnitude of the resultant: , , .
- A.
- B.
- C.
Show answer and explanation
Answer: A. , B. , C.
The magnitude of the resultant of two vectors is . When , , so the resultant is minimum, equal to . When , , so . When , , so the resultant is maximum, equal to . Therefore, the increasing order is , , . - Q10.Three vectors with magnitudes 3 units, 4 units, and 5 units are arranged to form a closed triangle. Arrange the following statements in the logical order that proves their resultant is zero: The third vector ends at the starting point of the first, The vectors are placed head to tail in sequence, The closing side of the triangle represents the resultant.
- A.The vectors are placed head to tail in sequence
- B.The third vector ends at the starting point of the first
- C.The closing side of the triangle represents the resultant
Show answer and explanation
Answer: A. The vectors are placed head to tail in sequence, B. The third vector ends at the starting point of the first, C. The closing side of the triangle represents the resultant
To prove that the resultant of the three vectors is zero, we use the triangle law (or polygon law) of vector addition.
Step 1: The vectors must first be arranged head to tail.
So the first correct statement is: "The vectors are placed head to tail in sequence".
Step 2: If after placing the three vectors in sequence, the third vector ends exactly at the starting point of the first vector, then the three vectors form a closed triangle.
So the next statement is: "The third vector ends at the starting point of the first".
Step 3: By the law of vector addition, the resultant is represented by the closing side drawn from the starting point of the first vector to the ending point of the last vector.
So the final statement is: "The closing side of the triangle represents the resultant."
Now, because the triangle is closed, the ending point of the last vector coincides with the starting point of the first vector. Therefore the closing side has zero length.
Hence, the resultant vector is zero:
So the logical order is:
1. The vectors are placed head to tail in sequence
2. The third vector ends at the starting point of the first
3. The closing side of the triangle represents the resultant
The marked order is correct.
Practise all 382 Mechanics – Physical Quantities & Vectors questions
Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.
More Physics chapters
- Current Electricity and Magnetism – AC MCQs348
- Current Electricity and Magnetism – Circuits MCQs472
- Current Electricity and Magnetism – Electrical Quantities MCQs313
- Current Electricity and Magnetism – Electromagnetic Induction MCQs472
- Current Electricity and Magnetism – Magnetic Field MCQs470
- Current Electricity and Magnetism – Magnetic Materials MCQs204
- Current Electricity and Magnetism – Thermoelectric MCQs256
- Electrostatics and Capacitors MCQs972
- Heat and Thermodynamics MCQs1,486
- Mechanics – Circular & Periodic Motion MCQs566
- Mechanics – Dynamics MCQs670
- Mechanics – Elasticity MCQs279
- Mechanics – Fluid Statics & Dynamics MCQs755
- Mechanics – Gravity MCQs497
- Mechanics – Kinematics MCQs362
- Mechanics – Rotational Dynamics MCQs378
- Modern Physics – Electron MCQs390
- Modern Physics – Nuclear Physics MCQs481
- Modern Physics – Particle Physics & Recent Trends MCQs394
- Modern Physics – Photon MCQs312
- Modern Physics – Radioactivity MCQs498
- Modern Physics – Semiconductors MCQs485
- Modern Physics – Wave-Particle Duality MCQs582
- Waves and Optics – Acoustics MCQs310
- Waves and Optics – Diffraction & Polarization MCQs436
- Waves and Optics – Interference MCQs202
- Waves and Optics – Reflection & Refraction MCQs412
- Waves and Optics – Stationary Waves MCQs304
- Waves and Optics – Wave Motion MCQs368
