Waves and Optics – Stationary Waves MCQ questions with answers

CEE Entrance · Physics. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 304 questions is free to practise on Prashnalaya.

Topics covered: Formation and properties of stationary (standing) waves, Harmonics and overtones in open and closed pipes, Vibrations of strings: harmonics and overtones

  1. Q1.
    Arrange the first four resonant frequencies of an open organ pipe of length in increasing order.
    • A.
    • B.
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. , C. , D.

    For an open pipe, all harmonics are present and the allowed frequencies are where . Therefore the first four resonant frequencies are in increasing order.
  2. Q2.
    A closed pipe produces only odd harmonics. Arrange the following modes in increasing order of frequency: first overtone, third overtone, fundamental, second overtone.
    • A.second overtone
    • B.fundamental
    • C.third overtone
    • D.first overtone
    Show answer and explanation

    Answer: A. second overtone, B. fundamental, C. third overtone, D. first overtone

    In a closed pipe, allowed harmonics are odd numbered: 1st, 3rd, 5th, 7th, ... The fundamental corresponds to the 1st harmonic, first overtone to the 3rd harmonic, second overtone to the 5th harmonic, and third overtone to the 7th harmonic. Since frequency increases with harmonic number, the correct order is fundamental, first overtone, second overtone, third overtone.
  3. Q3.
    For a closed pipe of length , arrange the following in decreasing order: wavelength of fundamental, wavelength of first overtone, wavelength of second overtone, wavelength of third overtone.
    • A.wavelength of second overtone
    • B.wavelength of third overtone
    • C.wavelength of fundamental
    • D.wavelength of first overtone
    Show answer and explanation

    Answer: A. wavelength of second overtone, B. wavelength of third overtone, C. wavelength of fundamental, D. wavelength of first overtone

    For a closed pipe, only odd harmonics occur. The wavelength of the allowed modes is where . Thus for fundamental, first overtone, second overtone, and third overtone, the wavelengths are respectively. In decreasing order, the largest comes first, so the correct arrangement is .
  4. Q4.
    Two pipes have the same length and are filled with air at the same temperature. Pipe A is open at both ends and Pipe B is closed at one end. Arrange the following frequencies in increasing order: fundamental of Pipe B, fundamental of Pipe A, first overtone of Pipe B, second harmonic of Pipe A.
    • A.first overtone of Pipe B
    • B.fundamental of Pipe A
    • C.second harmonic of Pipe A
    • D.fundamental of Pipe B
    Show answer and explanation

    Answer: A. first overtone of Pipe B, B. fundamental of Pipe A, C. second harmonic of Pipe A, D. fundamental of Pipe B

    For the open pipe A, the fundamental frequency is and the second harmonic is . For the closed pipe B, the fundamental is and the first overtone is the 3rd harmonic, so its frequency is . Comparing these values: . Therefore the increasing order is fundamental of Pipe B, fundamental of Pipe A, first overtone of Pipe B, second harmonic of Pipe A. The option listing second harmonic of Pipe A before first overtone of Pipe B would be incorrect because is greater than .
  5. Q5.
    A student records the frequencies 200 Hz, 600 Hz, 1000 Hz, and 1400 Hz from a closed air column. Arrange these observed frequencies according to the corresponding mode names from lowest to highest mode.
    • A.third overtone
    • B.fundamental
    • C.second overtone
    • D.first overtone
    Show answer and explanation

    Answer: A. third overtone, B. fundamental, C. second overtone, D. first overtone

    In a closed pipe, resonant frequencies appear in the ratio . The given frequencies are 200, 600, 1000, and 1400 Hz. Dividing by 200 gives the ratio , which matches the closed-pipe sequence. Therefore 200 Hz is the fundamental, 600 Hz is the first overtone, 1000 Hz is the second overtone, and 1400 Hz is the third overtone. Hence the correct order from lowest to highest mode is fundamental, first overtone, second overtone, third overtone.
  6. Q6.
    A guitar string produces a fundamental frequency of 110 Hz. Arrange the following frequencies in the order in which they appear as successive harmonics.
    440 Hz
    110 Hz
    330 Hz
    220 Hz
    • A.330 Hz
    • B.220 Hz
    • C.440 Hz
    • D.110 Hz
    Show answer and explanation

    Answer: A. 330 Hz, B. 220 Hz, C. 440 Hz, D. 110 Hz

    For a vibrating string, the harmonics are whole-number multiples of the fundamental frequency.

    If the fundamental frequency is Hz, then the successive harmonics are:






    So the correct order of the given frequencies as successive harmonics is:

    110 Hz, 220 Hz, 330 Hz, 440 Hz.

    Checking the options:
    - 110 Hz is the fundamental or 1st harmonic
    - 220 Hz is the 2nd harmonic
    - 330 Hz is the 3rd harmonic
    - 440 Hz is the 4th harmonic

    Therefore, the correct arrangement is ["110 Hz", "220 Hz", "330 Hz", "440 Hz"].
  7. Q7.
    A string fixed at both ends has length . Arrange the following harmonic modes in increasing order of the distance between two consecutive nodes.
    Second harmonic
    Fifth harmonic
    Fundamental
    Third harmonic
    • A.Third harmonic
    • B.Fundamental
    • C.Fifth harmonic
    • D.Second harmonic
    Show answer and explanation

    Answer: A. Third harmonic, B. Fundamental, C. Fifth harmonic, D. Second harmonic

    For a string fixed at both ends, the allowed standing waves satisfy

    where is the harmonic number.

    So,


    The distance between two consecutive nodes is half of the wavelength:


    Now calculate for each mode:
    - Fundamental ():
    - Second harmonic ():
    - Third harmonic ():
    - Fifth harmonic ():

    We need increasing order, i.e. from smallest to largest distance:


    Therefore the correct order is:
    - Fifth harmonic
    - Third harmonic
    - Second harmonic
    - Fundamental

    So the marked answer is correct.
  8. Q8.
    Arrange the following points in increasing order of displacement amplitude in a stationary wave from a node toward the nearest antinode. Point at one-fourth of the node-antinode distance from the node Node Point at half of the node-antinode distance from the node Antinode
    • A.Point at half of the node-antinode distance from the node
    • B.Antinode
    • C.Node
    • D.Point at one-fourth of the node-antinode distance from the node
    Show answer and explanation

    Answer: A. Point at half of the node-antinode distance from the node, B. Antinode, C. Node, D. Point at one-fourth of the node-antinode distance from the node

    In a stationary wave, the amplitude is not the same at all points. It depends on the distance from the nearest node.

    For a stationary wave, the amplitude at a point is given by

    or an equivalent form depending on where the origin is chosen. The important idea is:
    - At a node, amplitude is zero.
    - At an antinode, amplitude is maximum.
    - Between a node and the nearest antinode, amplitude increases continuously.

    Now compare the given positions from the node toward the nearest antinode:

    1. Node
    - Displacement amplitude = 0
    - This is the minimum possible amplitude.

    2. Point at one-fourth of the node-antinode distance from the node
    - This lies between node and antinode, so its amplitude is greater than at the node but less than farther points.

    3. Point at half of the node-antinode distance from the node
    - This is farther from the node than the one-fourth point, so its amplitude is larger.

    4. Antinode
    - Displacement amplitude is maximum here.

    Therefore, the increasing order of displacement amplitude is:


    So the correct arrangement is:
    - Node
    - Point at one-fourth of the node-antinode distance from the node
    - Point at half of the node-antinode distance from the node
    - Antinode
  9. Q9.
    Arrange the following statements about a stationary wave in the logical order from smallest phase difference to largest phase difference between particles. Two particles separated by one node Two particles lying in the same loop Two particles on opposite sides of two consecutive nodes Two particles in adjacent loops
    • A.Two particles on opposite sides of two consecutive nodes
    • B.Two particles lying in the same loop
    • C.Two particles in adjacent loops
    • D.Two particles separated by one node
    Show answer and explanation

    Answer: A. Two particles on opposite sides of two consecutive nodes, B. Two particles lying in the same loop, C. Two particles in adjacent loops, D. Two particles separated by one node

    In a stationary wave, the phase relation depends on whether the particles lie in the same segment (loop) between nodes or in different loops.

    Key rule:
    - All particles within the same loop vibrate in the same phase, so phase difference .
    - Particles in adjacent loops vibrate in opposite phase, so phase difference .
    - Crossing each node changes the phase by .

    Now evaluate each statement:

    1. Two particles lying in the same loop
    - They are between the same pair of nodes.
    - Hence they oscillate together in the same phase.
    - Phase difference .

    2. Two particles on opposite sides of two consecutive nodes
    - This means one particle is just to one side of a node and the other is just to the other side of the next node.
    - Between those two particles, two nodes are crossed.
    - Since each node changes phase by , total phase change is .
    - A phase difference of is equivalent to zero phase difference in oscillation.

    3. Two particles in adjacent loops
    - Adjacent loops are separated by one node.
    - Therefore their phase difference is .

    4. Two particles separated by one node
    - If one node lies between them, they are in adjacent loops.
    - So phase difference is also .

    Thus the phase differences are:
    - Same loop
    - Opposite sides of two consecutive nodes (equivalent to 0)
    - Adjacent loops
    - Separated by one node

    So from smallest to largest, the logical order is:
    1. Two particles lying in the same loop
    2. Two particles on opposite sides of two consecutive nodes
    3. Two particles in adjacent loops
    4. Two particles separated by one node

    Note: the last two have the same phase difference , so their relative order is interchangeable. The originally marked order was incorrect because it placed “two particles separated by one node” before “two particles in adjacent loops” as if they were different in phase difference, and it also misplaced the case involving two consecutive nodes.
  10. Q10.
    In an open organ pipe, the fundamental mode has antinodes at both open ends.
    Show answer and explanation
    This is true because displacement is maximum at an open end of a pipe, so each open end acts as a displacement antinode. In the fundamental mode of an open pipe, there is one node at the center and antinodes at both ends.

Practise all 304 Waves and Optics – Stationary Waves questions

Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.

Start practising free

More Physics chapters

All CEE Entrance subjects →