Waves and Optics – Reflection & Refraction MCQ questions with answers

CEE Entrance · Physics. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 412 questions is free to practise on Prashnalaya.

Topics covered: Dispersion of light; chromatic aberration and achromatism, Reflection at concave and convex mirrors: mirror formula, magnification, Refraction at plane surfaces: Snell's law, total internal reflection, Refraction through lenses: lens formula, magnification, power

  1. Q1.
    Arrange the following media in increasing order of refractive index for visible light: Air, Water, Glass, Diamond
    • A.Diamond
    • B.Glass
    • C.Air
    • D.Water
    Show answer and explanation

    Answer: A. Diamond, B. Glass, C. Air, D. Water

    The refractive index of a medium tells us how much light slows down in that medium compared to vacuum. It is given by

    where is the speed of light in vacuum and is the speed of light in the medium. A larger refractive index means light travels more slowly in that medium.

    For visible light, the approximate refractive indices of the given media are:
    - Air
    - Water
    - Glass
    - Diamond

    So, in increasing order of refractive index:


    Hence the correct arrangement is:
    Air, Water, Glass, Diamond.

    Why the order is correct:
    - Air has the smallest refractive index, very close to 1.
    - Water has a higher refractive index than air.
    - Ordinary glass has a higher refractive index than water.
    - Diamond has the highest refractive index among these substances.

    Therefore, the marked answer is correct.
  2. Q2.
    A ray of light passes from air into glass through a plane surface. Arrange the following quantities in increasing order: Angle of refraction, Angle of incidence, Refractive index of air, Refractive index of glass
    • A.Refractive index of glass
    • B.Angle of incidence
    • C.Refractive index of air
    • D.Angle of refraction
    Show answer and explanation

    Answer: A. Refractive index of glass, B. Angle of incidence, C. Refractive index of air, D. Angle of refraction

    When light passes from air into glass, it goes from a rarer medium to a denser medium.

    Two facts are important:

    1. For refraction from air to glass, the ray bends toward the normal, so the angle of refraction is smaller than the angle of incidence:

    So,
    Angle of refraction < Angle of incidence.

    2. The refractive index of air is less than that of glass:

    Numerically, air has refractive index about and glass has refractive index greater than (commonly about ).

    Thus we can compare the four quantities as follows:
    - Angle of refraction is less than angle of incidence.
    - Refractive index of air is less than refractive index of glass.
    - Also, since refractive index of air is about , and angles are measured in degrees here with for the given situation, the intended increasing order is:


    Therefore, the increasing order is:
    1. Angle of refraction
    2. Angle of incidence
    3. Refractive index of air
    4. Refractive index of glass

    So the correct arrangement is:
    Angle of refraction, Angle of incidence, Refractive index of air, Refractive index of glass.
  3. Q3.
    Arrange the following incident angles for a glass-air boundary in increasing order of the nature of the emergent result, from strongest refraction away from the normal to complete total internal reflection: , , Critical angle,
    • A.
    • B.Critical angle
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. Critical angle, C. , D.

    For light going from glass to air, the ray bends away from the normal because it is passing from a denser medium to a rarer medium. As the angle of incidence increases, the angle of refraction also increases.

    The behavior changes in this order:

    1. For angles smaller than the critical angle, refraction occurs, and the refracted ray bends away from the normal.
    2. As the incident angle becomes larger, this bending away from the normal becomes stronger.
    3. At the critical angle, the refracted ray makes with the normal, so it travels along the boundary.
    4. For angles greater than the critical angle, refraction stops and total internal reflection occurs.

    Now compare the given angles:
    - and are below the critical angle for a glass-air boundary.
    - produces more bending away from the normal than .
    - At the critical angle, the refracted ray just grazes the surface.
    - is greater than the critical angle for glass-air (which is about ), so total internal reflection occurs.

    Therefore, in increasing order from ordinary refraction away from the normal to complete total internal reflection:


    So the correct arrangement is:
    , , Critical angle,
  4. Q4.
    For a ray going from medium P to medium Q, the speed decreases, wavelength decreases, and frequency remains unchanged. Arrange the following statements in the logical physical sequence: The ray enters a denser medium, Speed decreases, Wavelength decreases, Frequency remains constant
    • A.Frequency remains constant
    • B.The ray enters a denser medium
    • C.Wavelength decreases
    • D.Speed decreases
    Show answer and explanation

    Answer: A. Frequency remains constant, B. The ray enters a denser medium, C. Wavelength decreases, D. Speed decreases

    When a light ray passes from one medium to another, the frequency is determined by the source and does not change at the boundary. If the ray enters an optically denser medium, its speed decreases. Using the wave relation :



    Since remains constant and decreases, must also decrease.

    So the logical physical sequence is:
    1. The ray enters a denser medium
    2. Speed decreases
    3. Frequency remains constant
    4. Wavelength decreases

    This matches the given marked order. The key idea is that wavelength changes as a consequence of the change in speed, while frequency stays unchanged across the boundary.
  5. Q5.
    Arrange the following events in the correct sequence for total internal reflection in an optical fiber: Light travels inside the denser core, Light strikes the core-cladding boundary at an angle greater than the critical angle, Total internal reflection occurs, Light continues propagating through the fiber
    • A.Light continues propagating through the fiber
    • B.Total internal reflection occurs
    • C.Light strikes the core-cladding boundary at an angle greater than the critical angle
    • D.Light travels inside the denser core
    Show answer and explanation

    Answer: A. Light continues propagating through the fiber, B. Total internal reflection occurs, C. Light strikes the core-cladding boundary at an angle greater than the critical angle, D. Light travels inside the denser core

    For total internal reflection in an optical fiber, the events must happen in this physical order:

    1. Light first travels inside the denser core.
    - In an optical fiber, the core has a higher refractive index than the cladding, so light is guided through the core.

    2. Light strikes the core-cladding boundary at an angle greater than the critical angle.
    - Total internal reflection occurs only when light goes from a denser medium to a rarer medium and the angle of incidence is greater than the critical angle.
    - The critical angle is the minimum angle of incidence for which total internal reflection begins.

    3. Total internal reflection occurs.
    - Since the light is in the denser core and hits the boundary at an angle greater than the critical angle, it is reflected back into the core instead of passing into the cladding.

    4. Light continues propagating through the fiber.
    - Because this reflection keeps repeating along the length of the fiber, the light signal continues to travel through the optical fiber.

    So the correct sequence is:
    Light travels inside the denser core Light strikes the core-cladding boundary at an angle greater than the critical angle Total internal reflection occurs Light continues propagating through the fiber.
  6. Q6.
    A student uses the mirror formula to find image distance for a concave mirror. Arrange the following steps in the correct order.
    Substitute the given values of and with proper sign convention into
    Identify the type of mirror and choose Cartesian sign convention
    Solve the equation for
    Interpret the sign of to tell whether the image is real or virtual
    • A.Interpret the sign of to tell whether the image is real or virtual
    • B.Substitute the given values of and with proper sign convention into
    • C.Identify the type of mirror and choose Cartesian sign convention
    • D.Solve the equation for
    Show answer and explanation

    Answer: A. Interpret the sign of to tell whether the image is real or virtual, B. Substitute the given values of and with proper sign convention into , C. Identify the type of mirror and choose Cartesian sign convention, D. Solve the equation for

    The marked order is correct.

    To find image distance for a concave mirror using the mirror formula, the logical sequence is:

    1. Identify the type of mirror and choose Cartesian sign convention
    - Before substituting anything, we must know the correct sign of focal length , object distance , and later image distance .
    - For a concave mirror under Cartesian sign convention, distances measured to the left of the pole are negative. Since the focus of a concave mirror lies in front of the mirror, is usually negative. For a real object placed in front of the mirror, is also negative.

    2. Substitute the given values of and with proper sign convention into
    - After deciding the signs correctly, place the values into the mirror formula.
    - This avoids sign mistakes, which are very common in mirror problems.

    3. Solve the equation for
    - Rearrange the formula algebraically to obtain the image distance.
    - For example,

    and then calculate .

    4. Interpret the sign of to tell whether the image is real or virtual
    - Once is found, its sign tells the nature and position of the image.
    - In Cartesian sign convention for mirrors:
    - means the image is formed in front of the mirror, so it is real.
    - means the image is formed behind the mirror, so it is virtual.

    So the correct order is:
    Identify sign convention substitute values solve for interpret the sign of .

    Hence the given answer is correct.
  7. Q7.
    For a convex mirror used as a rear-view mirror in a vehicle, arrange the image characteristics from the fixed one to the variable one as object distance changes from very far to nearer. Image remains erect Image remains virtual Image size increases gradually Image position shifts from near focus toward pole
    • A.Image remains virtual
    • B.Image size increases gradually
    • C.Image remains erect
    • D.Image position shifts from near focus toward pole
    Show answer and explanation

    Answer: A. Image remains virtual, B. Image size increases gradually, C. Image remains erect, D. Image position shifts from near focus toward pole

    For a convex mirror, the image formed for any object placed in front of it is always , , and . These are the basic fixed characteristics of a convex mirror image.

    Now the question asks to arrange the image characteristics from the fixed one to the variable one as object distance changes from very far to nearer.

    Step 1: Identify the fixed characteristics
    - The image always remains virtual.
    - The image always remains erect.
    These do not change with object distance.

    Step 2: Identify what changes when the object comes nearer
    - The image position changes: when the object is very far away, the image forms near the focus behind the mirror. As the object comes closer, the image shifts from near the focus toward the pole.
    - The image size changes: as the object comes nearer, the image becomes larger gradually, though it still remains smaller than the object.

    So the correct progression is:
    1. Fixed property: Image remains virtual
    2. Fixed property: Image remains erect
    3. Variable property: Image position shifts from near focus toward pole
    4. Variable property: Image size increases gradually

    Thus the correct order is:
    - Image remains virtual
    - Image remains erect
    - Image position shifts from near focus toward pole
    - Image size increases gradually

    The originally marked order placed "Image remains erect" before "Image remains virtual". Since both are fixed properties, that part may seem interchangeable conceptually, but for a definite ordered answer we place the standard image nature first (virtual), then orientation (erect), followed by the changing characteristics. Therefore the marked answer is treated as incorrect.
  8. Q8.
    A concave mirror has a focal length of 15 cm. An object is placed at distances 10 cm, 15 cm, 20 cm, and 60 cm from the pole. Arrange these object distances in the order in which the magnitude of image distance increases.
    • A.20 cm
    • B.15 cm
    • C.10 cm
    • D.60 cm
    Show answer and explanation

    Answer: A. 20 cm, B. 15 cm, C. 10 cm, D. 60 cm

    For a concave mirror, use the mirror formula

    Using the Cartesian sign convention for a concave mirror:
    - focal length cm
    - object distance is negative for objects placed in front of the mirror

    We must find the magnitude of image distance, that is , for each object position.

    1. For object at cm:


    So,

    Hence,


    2. For object at cm:

    This is the focal point of the concave mirror. When the object is at focus, the reflected rays become parallel, so the image forms at infinity.
    Thus,


    3. For object at cm:


    So,

    Hence,


    4. For object at cm:


    So,

    Hence,


    Now arrange the object distances in increasing order of image distance magnitude:
    - at cm, cm
    - at cm, cm
    - at cm, cm
    - at cm,

    Therefore, the correct order is:


    The originally marked order placed cm first, but the image at focus is formed at infinity, so it should come last, not first.
  9. Q9.
    Arrange the following cases of spherical mirrors in the order of increasing value of magnification . Convex mirror with object anywhere in front Concave mirror with object at center of curvature Concave mirror with object between focus and pole Concave mirror with object beyond center of curvature
    • A.Concave mirror with object beyond center of curvature
    • B.Convex mirror with object anywhere in front
    • C.Concave mirror with object between focus and pole
    • D.Concave mirror with object at center of curvature
    Show answer and explanation

    Answer: A. Concave mirror with object beyond center of curvature, B. Convex mirror with object anywhere in front, C. Concave mirror with object between focus and pole, D. Concave mirror with object at center of curvature

    Magnification for a spherical mirror is given by

    Here, we compare the value of magnification in each case.

    1. Convex mirror with object anywhere in front:
    A convex mirror always forms a virtual, erect, and diminished image. Therefore, its magnification is always positive and less than 1:

    So this gives the smallest magnification among the given cases.

    2. Concave mirror with object beyond center of curvature:
    For a concave mirror, when the object is beyond , the image forms between and . The image is real, inverted, and diminished, so the magnitude of magnification is less than 1:

    Thus it comes after the convex mirror case in the usual increasing comparison.

    3. Concave mirror with object at center of curvature:
    When the object is at , the image is also formed at , real, inverted, and of the same size as the object. Hence,

    So this comes after the diminished-image cases.

    4. Concave mirror with object between focus and pole:
    In this position, the image is virtual, erect, and enlarged. Therefore,

    This is the greatest magnification among the given cases.

    Hence, the increasing order of magnification is:


    So the correct arrangement is:
    1. Convex mirror with object anywhere in front
    2. Concave mirror with object beyond center of curvature
    3. Concave mirror with object at center of curvature
    4. Concave mirror with object between focus and pole

    The originally marked order is correct.
  10. Q10.
    Arrange the colours of visible light in increasing order of wavelength in air.
    • A.Yellow
    • B.Blue
    • C.Orange
    • D.Indigo
    • E.Red
    • F.Green
    • 7.Violet
    Show answer and explanation

    Answer: A. Yellow, B. Blue, C. Orange, D. Indigo, E. Red, F. Green, 7. Violet

    In visible light, violet has the shortest wavelength and red has the longest wavelength. Therefore, the increasing order of wavelength is Violet, Indigo, Blue, Green, Yellow, Orange, Red.

Practise all 412 Waves and Optics – Reflection & Refraction questions

Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.

Start practising free

More Physics chapters

All CEE Entrance subjects →