Modern Physics – Electron MCQ questions with answers

CEE Entrance · Physics. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 390 questions is free to practise on Prashnalaya.

Topics covered: J.J. Thomson's experiment: charge-to-mass ratio, Millikan's oil drop experiment: charge of electron, Motion of electron in electric field; cathode ray tube, Motion of electron in magnetic field

  1. Q1.
    Arrange the following observed charges on oil drops in increasing order to identify the quantization pattern.
    C
    C
    C
    C
    • A. C
    • B. C
    • C. C
    • D. C
    Show answer and explanation

    Answer: A. C, B. C, C. C, D. C

    To arrange the observed charges in increasing order, compare their numerical coefficients since all have the same power of ten, . The given charges are:

    C, C, C, C

    Now compare the numbers , , , and :



    So the increasing order is:



    This also shows the quantization of charge. Each value is an integer multiple of the elementary charge C:

    - C
    - C
    - C
    - C

    Hence, the correct arrangement is from the smallest multiple of to the largest multiple of . The originally marked answer is correct.
  2. Q2.
    Arrange the following force conditions for a negatively charged oil drop as the electric field is changed from zero to a value that can suspend it. Only gravitational and buoyant effects with viscous drag determine motion The drop falls with terminal speed Upward electric force is introduced by applying the field Electric force balances effective weight and the drop becomes stationary
    • A.Electric force balances effective weight and the drop becomes stationary
    • B.Only gravitational and buoyant effects with viscous drag determine motion
    • C.The drop falls with terminal speed
    • D.Upward electric force is introduced by applying the field
    Show answer and explanation

    Answer: A. Electric force balances effective weight and the drop becomes stationary, B. Only gravitational and buoyant effects with viscous drag determine motion, C. The drop falls with terminal speed, D. Upward electric force is introduced by applying the field

    The given situation is the Millikan oil-drop type process.

    We must arrange the events as the electric field changes from zero to a value just sufficient to suspend a negatively charged oil drop.

    Step 1: No electric field is applied initially.
    So the drop is acted on only by:
    - gravitational force downward,
    - buoyant force upward,
    - viscous drag opposing motion.

    Therefore the first condition is:
    "Only gravitational and buoyant effects with viscous drag determine motion"

    Step 2: Under these forces, the drop falls.
    As it falls, viscous drag increases until it balances the effective downward force .
    At that stage, acceleration becomes zero and the drop moves with constant terminal velocity.
    So the next statement is:
    "The drop falls with terminal speed"

    Step 3: Now an electric field is applied.
    Since the oil drop is negatively charged, the applied field is chosen so that the electric force acts upward.
    Thus the next event is:
    "Upward electric force is introduced by applying the field"

    Step 4: The electric field is increased until the upward electric force exactly balances the effective weight of the drop.
    That means:

    At this point the net force is zero, so the drop becomes stationary.
    Hence the final statement is:
    "Electric force balances effective weight and the drop becomes stationary"

    So the correct order is:
    1. Only gravitational and buoyant effects with viscous drag determine motion
    2. The drop falls with terminal speed
    3. Upward electric force is introduced by applying the field
    4. Electric force balances effective weight and the drop becomes stationary

    The originally marked order is correct.
  3. Q3.
    Arrange the following logical conclusions of Millikan's experiment from raw measurements to the final atomic insight.
    Charges on many drops are calculated
    Each measured charge is found to be an integer multiple of a smallest value
    The smallest common value is identified as
    Electric charge is concluded to be quantized
    • A.The smallest common value is identified as
    • B.Charges on many drops are calculated
    • C.Electric charge is concluded to be quantized
    • D.Each measured charge is found to be an integer multiple of a smallest value
    Show answer and explanation

    Answer: A. The smallest common value is identified as , B. Charges on many drops are calculated, C. Electric charge is concluded to be quantized, D. Each measured charge is found to be an integer multiple of a smallest value

    In Millikan’s oil-drop experiment, the reasoning proceeds from experimental measurement to general conclusion in a clear sequence.

    1. First, the charges on many individual oil drops are calculated from the observed motion of the drops in gravitational and electric fields. This gives a set of measured charge values.

    2. Next, these measured charges are compared. Millikan found that the charge on each drop was not random; instead, each value could be written as an integer multiple of a certain smallest charge. In other words, if the smallest value is , then the charges were of the form , where is an integer.

    3. Then, this smallest common value is identified as , the elementary charge. This is the fundamental unit of electric charge carried by a single electron in magnitude.

    4. Finally, from this pattern, the atomic-level conclusion is drawn: electric charge is quantized. That means charge does not occur in arbitrary continuous amounts, but in discrete packets equal to integral multiples of .

    So the correct order is:
    Charges on many drops are calculated Each measured charge is found to be an integer multiple of a smallest value The smallest common value is identified as Electric charge is concluded to be quantized.
  4. Q4.
    Arrange the following events in the correct order for the motion of an electron entering a cathode ray tube and finally producing a visible spot on the screen. Electron beam strikes fluorescent screen Electrons are emitted from heated cathode Beam is accelerated by anode Beam gets deflected by electric field plates
    • A.Beam gets deflected by electric field plates
    • B.Electron beam strikes fluorescent screen
    • C.Beam is accelerated by anode
    • D.Electrons are emitted from heated cathode
    Show answer and explanation

    Answer: A. Beam gets deflected by electric field plates, B. Electron beam strikes fluorescent screen, C. Beam is accelerated by anode, D. Electrons are emitted from heated cathode

    In a cathode ray tube, the sequence of events follows the actual path of the electrons from their source to the screen.

    1. First, electrons are released from the heated cathode by thermionic emission. Heating gives some electrons enough energy to escape from the metal surface.

    2. Next, these electrons are attracted toward the positively charged anode and are accelerated. So the electron beam gains speed here.

    3. After acceleration, the beam passes through the deflecting electric field plates. The electric field between these plates changes the direction of the moving electrons, so the beam gets deflected.

    4. Finally, the electron beam reaches the fluorescent screen. When the electrons strike the screen, the fluorescent material glows and produces a visible spot.

    Therefore, the correct order is:
    Electrons are emitted from heated cathode Beam is accelerated by anode Beam gets deflected by electric field plates Electron beam strikes fluorescent screen.

    The originally marked order is correct.
  5. Q5.
    Arrange the following statements in the correct sequence to derive the expression for electric field deflection sensitivity of a cathode ray tube.
    Use for motion between plates
    Write electric force as
    Replace by
    Express time as
    • A.Replace by
    • B.Use for motion between plates
    • C.Express time as
    • D.Write electric force as
    Show answer and explanation

    Answer: A. Replace by , B. Use for motion between plates, C. Express time as , D. Write electric force as

    To derive the electric field deflection sensitivity in a cathode ray tube, we first identify the force acting on the electron due to the electric field, then convert that force into acceleration, then find the time the electron spends between the plates, and finally use the kinematic equation for vertical displacement.

    Correct sequence:
    1. Write electric force as
    2. Replace by
    3. Express time as
    4. Use for motion between plates

    Step-by-step reasoning:
    - An electron in an electric field experiences electric force

    - From Newton’s second law, acceleration is

    Substituting gives

    - If the length of the deflecting plate is and the horizontal velocity of the electron is , then the time spent between the plates is

    - The vertical displacement while moving between the plates is given by

    Substituting and ,


    So the logical derivation must begin with force, then acceleration, then time, and finally displacement. Hence the marked order is correct.
  6. Q6.
    Arrange the following steps of J.J. Thomson's experiment in the correct logical order for determining the charge-to-mass ratio of the electron.
    A beam of cathode rays is produced in a discharge tube.
    Electric and magnetic fields are adjusted so the beam remains undeflected.
    The velocity of electrons is obtained from the balance of fields.
    The magnetic deflection is then used to calculate .
    • A.The magnetic deflection is then used to calculate .
    • B.The velocity of electrons is obtained from the balance of fields.
    • C.A beam of cathode rays is produced in a discharge tube.
    • D.Electric and magnetic fields are adjusted so the beam remains undeflected.
    Show answer and explanation

    Answer: A. The magnetic deflection is then used to calculate ., B. The velocity of electrons is obtained from the balance of fields., C. A beam of cathode rays is produced in a discharge tube., D. Electric and magnetic fields are adjusted so the beam remains undeflected.

    In J.J. Thomson's experiment, the logical sequence is as follows:

    1. First, a beam of cathode rays is produced in a discharge tube. This provides the stream of electrons whose properties are to be studied.

    2. Next, electric and magnetic fields are applied and adjusted so that the beam remains undeflected. When there is no deflection, the electric force and magnetic force balance each other:

    Cancelling , we get:

    So this step allows the velocity of the electrons to be determined.

    3. Therefore, after balancing the fields, the velocity of electrons is obtained from the relation above.

    4. Finally, using the known velocity and the magnetic deflection produced separately, Thomson calculated the charge-to-mass ratio:


    So the correct order is:
    - A beam of cathode rays is produced in a discharge tube.
    - Electric and magnetic fields are adjusted so the beam remains undeflected.
    - The velocity of electrons is obtained from the balance of fields.
    - The magnetic deflection is then used to calculate .

    The marked order is already correct.
  7. Q7.
    Arrange the following physical quantities in the sequence used when the beam is undeflected in crossed fields and then analyzed magnetically.
    Electric field strength
    Magnetic field for no deflection
    Electron speed
    Charge-to-mass ratio
    • A.Electron speed
    • B.Charge-to-mass ratio
    • C.Electric field strength
    • D.Magnetic field for no deflection
    Show answer and explanation

    Answer: A. Electron speed , B. Charge-to-mass ratio , C. Electric field strength , D. Magnetic field for no deflection

    This ordering follows the logic of Thomson’s experiment using crossed electric and magnetic fields.

    Step 1: Start with the known electric field strength .
    The electric field is applied between plates, so is one of the given/measured quantities.

    Step 2: Adjust the magnetic field until the electron beam is undeflected.
    When the beam passes straight through crossed fields, the electric force and magnetic force balance each other:

    Cancelling gives:


    Step 3: Calculate the electron speed .
    From the balance condition,

    So the speed is found only after knowing both and the magnetic field for no deflection .

    Step 4: Determine the charge-to-mass ratio .
    Once is known, the beam is analyzed in a magnetic field, using the circular motion relation:

    which leads to

    Thus is obtained after finding .

    Therefore, the correct sequence is:
    1. Electric field strength
    2. Magnetic field for no deflection
    3. Electron speed
    4. Charge-to-mass ratio

    The marked answer already matches this correct order.
  8. Q8.
    Arrange the following statements from most direct observation to final conclusion in Thomson's experiment.
    Cathode rays bend toward the positive plate in an electric field.
    Cathode rays carry negative charge.
    Their path is also affected by a magnetic field.
    The particles have a very large compared with ions.
    • A.Their path is also affected by a magnetic field.
    • B.Cathode rays carry negative charge.
    • C.The particles have a very large compared with ions.
    • D.Cathode rays bend toward the positive plate in an electric field.
    Show answer and explanation

    Answer: A. Their path is also affected by a magnetic field., B. Cathode rays carry negative charge., C. The particles have a very large compared with ions., D. Cathode rays bend toward the positive plate in an electric field.

    In Thomson's cathode ray experiment, we must arrange the statements from the most direct experimental observation to the final conclusion.

    First come the direct observations:
    1. Cathode rays bend toward the positive plate in an electric field.
    - This is an immediate observation from applying an electric field.
    - Since the rays move toward the positive plate, they must carry negative charge, because opposite charges attract.

    2. Their path is also affected by a magnetic field.
    - This is another direct observation.
    - Deflection in a magnetic field shows that cathode rays are made of moving charged particles, not neutral radiation.

    After these observations, Thomson drew conclusions:
    3. Cathode rays carry negative charge.
    - This conclusion follows mainly from the electric-field deflection toward the positive plate.

    4. The particles have a very large compared with ions.
    - After studying the deflection quantitatively in electric and magnetic fields, Thomson calculated the charge-to-mass ratio .
    - He found it to be much larger than that of known ions, showing that these particles are extremely light. This was the final conclusion leading toward the discovery of the electron.

    So the correct order is:
    - electric deflection observation,
    - magnetic deflection observation,
    - conclusion of negative charge,
    - conclusion of large .

    Therefore, the marked answer is correct.
  9. Q9.
    Arrange the following expressions in the proper derivation order for obtaining in Thomson's experiment.



    • A.
    • B.
    • C.
    • D.
    Show answer and explanation

    Answer: A. , B. , C. , D.

    In Thomson’s experiment, the derivation proceeds by first finding the velocity of the electron using crossed electric and magnetic fields, and then using the circular motion in a magnetic field alone.

    Step 1: In the crossed fields condition for no deflection, the electric force balances the magnetic force:


    Step 2: Solving this for velocity :


    Step 3: When the electron moves in the magnetic field and follows a circular path, the magnetic force provides the centripetal force:


    Step 4: Rearranging,

    Now substitute :


    So the correct derivation order is:
    1.
    2.
    3.
    4.

    Thus, the marked order is correct.
  10. Q10.
    A student performs Thomson's experiment. Arrange the laboratory actions in the correct sequence.
    Switch on the discharge tube to produce cathode rays.
    Apply crossed electric and magnetic fields.
    Adjust the fields until the fluorescent spot becomes undeflected.
    Measure the magnetic deflection parameters to calculate .
    • A.Adjust the fields until the fluorescent spot becomes undeflected.
    • B.Measure the magnetic deflection parameters to calculate .
    • C.Apply crossed electric and magnetic fields.
    • D.Switch on the discharge tube to produce cathode rays.
    Show answer and explanation

    Answer: A. Adjust the fields until the fluorescent spot becomes undeflected., B. Measure the magnetic deflection parameters to calculate ., C. Apply crossed electric and magnetic fields., D. Switch on the discharge tube to produce cathode rays.

    In Thomson’s experiment, the steps must follow the actual laboratory procedure used to first produce the electron beam, then determine its velocity, and finally calculate the charge-to-mass ratio.

    Correct sequence:
    1. Switch on the discharge tube to produce cathode rays.
    2. Apply crossed electric and magnetic fields.
    3. Adjust the fields until the fluorescent spot becomes undeflected.
    4. Measure the magnetic deflection parameters to calculate .

    Why this order is correct:

    First, the discharge tube must be switched on so that cathode rays (electrons) are produced. Without the beam, no observation or adjustment is possible.

    Second, crossed electric and magnetic fields are applied to the moving electrons. These fields act in opposite directions on the beam.

    Third, the strengths of the fields are adjusted until the fluorescent spot shows no deflection. At this condition, the electric force equals the magnetic force:

    So,

    This gives the velocity of the electrons.

    Finally, after finding the velocity, the magnetic deflection data are used to calculate . Using the magnetic force as the centripetal force,

    which gives

    Substituting the value of obtained from the undeflected condition allows calculation of .

    Thus, the marked order is correct.

Practise all 390 Modern Physics – Electron questions

Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.

Start practising free

More Physics chapters

All CEE Entrance subjects →