Modern Physics – Wave-Particle Duality MCQ questions with answers
CEE Entrance · Physics. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 582 questions is free to practise on Prashnalaya.
Topics covered: Bohr's atomic model: postulates and energy levels for hydrogen, Bragg's law and applications of X-rays, de-Broglie wavelength: concept and calculations, Heisenberg's uncertainty principle, Spectral series of hydrogen (Lyman, Balmer, Paschen, etc.), X-rays: production and properties
- Q1.Arrange the steps in the production of X-rays in a Coolidge tube in the correct order.
- A.Metal target suddenly decelerates electrons and X-rays are emitted
- B.A high potential difference accelerates electrons toward the anode
- C.The filament is heated and emits electrons by thermionic emission
- D.Electrons strike the target material
Show answer and explanation
Answer: A. Metal target suddenly decelerates electrons and X-rays are emitted, B. A high potential difference accelerates electrons toward the anode, C. The filament is heated and emits electrons by thermionic emission, D. Electrons strike the target material
In a Coolidge tube, first the cathode filament is heated, causing thermionic emission of electrons. Next, a high potential difference accelerates these electrons toward the anode. Then the electrons strike the heavy metal target. Finally, their sudden deceleration near or inside the target produces X-rays. - Q2.Arrange the following electromagnetic radiations in order of increasing wavelength.
- A.Visible light
- B.Ultraviolet rays
- C.Gamma rays
- D.X-rays
Show answer and explanation
Answer: A. Visible light, B. Ultraviolet rays, C. Gamma rays, D. X-rays
Among these radiations, gamma rays have the shortest wavelength, followed by X-rays, then ultraviolet rays, and visible light has the longest wavelength. Therefore the increasing order of wavelength is gamma rays, X-rays, ultraviolet rays, visible light. - Q3.Arrange the following target materials in order of increasing effectiveness for producing characteristic X-rays based on atomic number.
- A.Copper
- B.Molybdenum
- C.Tungsten
- D.Chromium
Show answer and explanation
Answer: A. Copper, B. Molybdenum, C. Tungsten, D. Chromium
Characteristic X-ray production depends strongly on atomic number. As atomic number increases, the energies of inner-shell transitions increase and the target generally becomes more effective for harder characteristic X-rays. The atomic numbers are Cr = 24, Cu = 29, Mo = 42, W = 74. So the correct increasing order is chromium, copper, molybdenum, tungsten. - Q4.Arrange the following X-ray photons in order of increasing frequency if the tube is operated at the same condition.
- A.A photon of wavelength 0.20 nm
- B.A photon of wavelength 0.05 nm
- C.A photon of wavelength 0.10 nm
- D.A photon of wavelength 0.15 nm
Show answer and explanation
Answer: A. A photon of wavelength 0.20 nm, B. A photon of wavelength 0.05 nm, C. A photon of wavelength 0.10 nm, D. A photon of wavelength 0.15 nm
Frequency and wavelength are inversely related by . So a larger wavelength means a smaller frequency. Therefore, in increasing order of frequency, we arrange from the largest wavelength to the smallest wavelength: 0.20 nm, 0.15 nm, 0.10 nm, 0.05 nm. - Q5.For a Coolidge tube, arrange the following accelerating voltages in order of increasing minimum wavelength of emitted X-rays.
- A.40 kV
- B.20 kV
- C.80 kV
- D.60 kV
Show answer and explanation
Answer: A. 40 kV, B. 20 kV, C. 80 kV, D. 60 kV
The Duane-Hunt law gives the minimum wavelength as . Thus, the minimum wavelength is inversely proportional to the accelerating voltage. Higher voltage gives a smaller minimum wavelength. Therefore, for increasing minimum wavelength, we must list the voltages in decreasing order: 80 kV, 60 kV, 40 kV, 20 kV. - Q6.Arrange the following electromagnetic radiations in increasing order of wavelength: X-rays, visible light, gamma rays, ultraviolet rays.
- A.visible light
- B.ultraviolet rays
- C.gamma rays
- D.X-rays
Show answer and explanation
Answer: A. visible light, B. ultraviolet rays, C. gamma rays, D. X-rays
Among the given radiations, gamma rays have the shortest wavelength. X-rays have slightly larger wavelength than gamma rays. Ultraviolet rays have longer wavelength than X-rays, and visible light has the longest wavelength among these four. Therefore the increasing order of wavelength is gamma rays, X-rays, ultraviolet rays, visible light. - Q7.For first-order Bragg reflection from a crystal, arrange the following values of glancing angle in increasing order if the wavelength and order remain constant and the interplanar spacings are 0.10 nm, 0.15 nm, 0.20 nm, and 0.25 nm.
- A.0.20 nm
- B.0.25 nm
- C.0.10 nm
- D.0.15 nm
Show answer and explanation
Answer: A. 0.20 nm, B. 0.25 nm, C. 0.10 nm, D. 0.15 nm
Bragg's law is . For fixed and , we get . So larger interplanar spacing gives smaller glancing angle. Hence the smallest angle corresponds to 0.25 nm and the largest angle corresponds to 0.10 nm. Therefore the increasing order of glancing angle is 0.25 nm, 0.20 nm, 0.15 nm, 0.10 nm. Since the options are written as spacings arranged according to increasing angle, that is the correct sequence. - Q8.Arrange the following steps of determining crystal structure by X-ray diffraction in the correct order: Direct X-rays on the crystal, Measure diffraction angles, Apply Bragg's law, Calculate interplanar spacing.
- A.Calculate interplanar spacing
- B.Apply Bragg's law
- C.Direct X-rays on the crystal
- D.Measure diffraction angles
Show answer and explanation
Answer: A. Calculate interplanar spacing, B. Apply Bragg's law, C. Direct X-rays on the crystal, D. Measure diffraction angles
To determine crystal structure using X-ray diffraction, the steps follow the experimental and calculation sequence:
1. Direct X-rays on the crystal
First, a beam of X-rays is made to fall on the crystal. The atoms in the crystal are arranged in regular planes, so they diffract the incident X-rays.
2. Measure diffraction angles
After diffraction occurs, the angles at which strong reflected or diffracted beams appear are measured from the diffraction pattern.
3. Apply Bragg's law
The measured angles are then related to the crystal planes using Bragg's law:
where is the order of diffraction, is the wavelength of X-rays, is the interplanar spacing, and is the diffraction angle.
4. Calculate interplanar spacing
Using the known wavelength and measured angle in Bragg's law, the value of is calculated. This interplanar spacing helps in identifying the crystal structure.
So the correct order is:
Direct X-rays on the crystal Measure diffraction angles Apply Bragg's law Calculate interplanar spacing. - Q9.An X-ray of wavelength nm is incident on a crystal with interplanar spacing nm. Arrange the possible diffraction orders in increasing order of Bragg angle: first order, second order, third order.
- A.third order
- B.first order
- C.second order
Show answer and explanation
Answer: A. third order, B. first order, C. second order
Using Bragg's law , with fixed and , larger order gives larger value of , hence larger . For this crystal, nm. For first order, . For second order, . For third order, . Therefore the Bragg angle increases from first to second to third order. - Q10.Arrange the following X-ray applications from lower photon energy requirement to higher photon energy requirement: crystal structure analysis, airport baggage scanning, medical bone imaging, cancer radiotherapy.
- A.airport baggage scanning
- B.medical bone imaging
- C.cancer radiotherapy
- D.crystal structure analysis
Show answer and explanation
Answer: A. airport baggage scanning, B. medical bone imaging, C. cancer radiotherapy, D. crystal structure analysis
Medical bone imaging usually uses relatively lower-energy diagnostic X-rays. Crystal structure analysis uses characteristic X-rays with energies generally higher than simple diagnostic imaging. Airport baggage scanning often uses stronger penetrating X-rays than routine medical imaging to pass through luggage materials. Cancer radiotherapy requires the highest energy among these for deep penetration and destruction of malignant cells. Hence the order from lower to higher photon energy requirement is medical bone imaging, crystal structure analysis, airport baggage scanning, cancer radiotherapy.
Practise all 582 Modern Physics – Wave-Particle Duality questions
Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.
More Physics chapters
- Current Electricity and Magnetism – AC MCQs348
- Current Electricity and Magnetism – Circuits MCQs472
- Current Electricity and Magnetism – Electrical Quantities MCQs313
- Current Electricity and Magnetism – Electromagnetic Induction MCQs472
- Current Electricity and Magnetism – Magnetic Field MCQs470
- Current Electricity and Magnetism – Magnetic Materials MCQs204
- Current Electricity and Magnetism – Thermoelectric MCQs256
- Electrostatics and Capacitors MCQs972
- Heat and Thermodynamics MCQs1,486
- Mechanics – Circular & Periodic Motion MCQs566
- Mechanics – Dynamics MCQs670
- Mechanics – Elasticity MCQs279
- Mechanics – Fluid Statics & Dynamics MCQs755
- Mechanics – Gravity MCQs497
- Mechanics – Kinematics MCQs362
- Mechanics – Physical Quantities & Vectors MCQs382
- Mechanics – Rotational Dynamics MCQs378
- Modern Physics – Electron MCQs390
- Modern Physics – Nuclear Physics MCQs481
- Modern Physics – Particle Physics & Recent Trends MCQs394
- Modern Physics – Photon MCQs312
- Modern Physics – Radioactivity MCQs498
- Modern Physics – Semiconductors MCQs485
- Waves and Optics – Acoustics MCQs310
- Waves and Optics – Diffraction & Polarization MCQs436
- Waves and Optics – Interference MCQs202
- Waves and Optics – Reflection & Refraction MCQs412
- Waves and Optics – Stationary Waves MCQs304
- Waves and Optics – Wave Motion MCQs368
