Modern Physics – Semiconductors MCQ questions with answers

CEE Entrance · Physics. Below are 10 sample questions from this chapter, each with the correct answer and an explanation. The full set of 485 questions is free to practise on Prashnalaya.

Topics covered: Energy bands in solids: conductors, semiconductors, insulators, Intrinsic and extrinsic semiconductors (n-type and p-type), Logic gates: AND, OR, NOT, NOR, NAND – truth tables and symbols, p-n diode as a rectifier (half-wave and full-wave), p-n junction diode: forward and reverse biasing

  1. Q1.
    A pure semiconductor at room temperature is called
    • A.n-type semiconductor
    • B.Intrinsic semiconductor
    • C.p-type semiconductor
    • D.Degenerate semiconductor
    Show answer and explanation

    Answer: B. Intrinsic semiconductor

    A pure semiconductor without any intentional impurity atoms is called an intrinsic semiconductor. Its conduction is due only to thermally generated electron-hole pairs.
  2. Q2.
    In an intrinsic semiconductor, the number of free electrons is
    • A.greater than the number of holes
    • B.less than the number of holes
    • C.equal to the number of holes
    • D.zero at room temperature
    Show answer and explanation

    Answer: C. equal to the number of holes

    In an intrinsic semiconductor, electrons and holes are produced in pairs by thermal excitation. Therefore, electron concentration equals hole concentration.
  3. Q3.
    Silicon becomes an n-type semiconductor when doped with
    • A.Aluminium
    • B.Boron
    • C.Phosphorus
    • D.Indium
    Show answer and explanation

    Answer: C. Phosphorus

    Phosphorus is a pentavalent impurity. When added to silicon, it contributes one extra electron for conduction, making the semiconductor n-type.
  4. Q4.
    The majority charge carriers in a p-type semiconductor are
    • A.electrons
    • B.protons
    • C.holes
    • D.ions
    Show answer and explanation

    Answer: C. holes

    A p-type semiconductor is formed by doping with trivalent impurities, which create vacancies called holes. These holes are the majority carriers.
  5. Q5.
    The impurity added to produce a p-type semiconductor is generally
    • A.trivalent
    • B.pentavalent
    • C.tetravalent
    • D.divalent
    Show answer and explanation

    Answer: A. trivalent

    Trivalent impurities such as boron and aluminium have three valence electrons. When doped into silicon or germanium, they create holes, producing a p-type semiconductor.
  6. Q6.
    Which one of the following is a pentavalent dopant for germanium?
    • A.Gallium
    • B.Indium
    • C.Arsenic
    • D.Boron
    Show answer and explanation

    Answer: C. Arsenic

    Arsenic has five valence electrons and acts as a donor impurity in germanium, thus producing an n-type semiconductor.
  7. Q7.
    The minority carriers in an n-type semiconductor are
    • A.donor ions
    • B.free electrons
    • C.holes
    • D.lattice ions
    Show answer and explanation

    Answer: C. holes

    In an n-type semiconductor, electrons are the majority carriers because of donor doping. Holes are present only in small numbers, so they are minority carriers.
  8. Q8.
    Which statement is correct for an intrinsic semiconductor?
    • A.It contains only acceptor impurities
    • B.It contains only donor impurities
    • C.It has no intentional impurity
    • D.It has only holes as charge carriers
    Show answer and explanation

    Answer: C. It has no intentional impurity

    An intrinsic semiconductor is pure and does not contain intentionally added donor or acceptor impurities. Both electrons and holes contribute equally to conduction.
  9. Q9.
    A donor impurity atom in silicon contributes
    • A.one extra electron
    • B.one extra hole
    • C.two extra electrons
    • D.no charge carrier
    Show answer and explanation

    Answer: A. one extra electron

    A donor impurity such as phosphorus has five valence electrons. Four form covalent bonds with silicon atoms and the fifth becomes a loosely bound extra electron.
  10. Q10.
    Which one is an example of a trivalent impurity?
    • A.Antimony
    • B.Phosphorus
    • C.Arsenic
    • D.Boron
    Show answer and explanation

    Answer: D. Boron

    Boron has three valence electrons, so it is a trivalent impurity. It acts as an acceptor and produces p-type semiconductors.

Practise all 485 Modern Physics – Semiconductors questions

Instant feedback, explanations, timed mock tests and progress tracking. Free on the web and Android.

Start practising free

More Physics chapters

All CEE Entrance subjects →